Questions related to the Continuum Mechanics Division of Elasticity. The bending of beams, deflection of rods, or in general, applications of Hooke's Law generalized to three dimensions.

learn more… | top users | synonyms

0
votes
1answer
26 views

Biot coefficient as function of porosity

Can the Biot poroelasticity coefficient $\alpha$ be approximated as a function solely of porosity $\phi$, and if so then how (and under what conditions)? I've read (e.g. 2.02-3 here) that it can, ...
1
vote
1answer
38 views

Young's Modulus and resonance frequency

While trying to find an idea for a simple undergraduate level lab project (using PASCO sensors), I stumbled upon this equation: $$Y = \frac{38.3*f_0^2*\rho*\ell^4 }{ d^2}$$ where: $Y$ = Young's ...
2
votes
1answer
46 views

Deformation of an elastic bar

We know that if we fix a bar at one of its ends, then the other one will descend by $s = A \cdot F l^3, A = const.$ (we can assume that $F$ is the gravitational force. ...
1
vote
0answers
24 views

should transverse and longitudinal phonon velocities be equal for this mass spring system?

Let's say we have a cubic lattice of identical masses $m$, each connected to its 6 nearest neighbors by identical spring constants $k$. Essentially, the problem is I get an eigenvalue problem with ...
0
votes
1answer
25 views

Restoring force in circular rod

Can somebody explain how to calculate the restoring force in a uniform circular rod with known Young's modulus and diameter. I would need the restoring force in a specified distance from the origin ...
1
vote
0answers
57 views

Plastic deformation energy dissipation due to inelastic collision

I have been attempting to determine an analytical expression for the coefficient of restitution (or any similar collision parameter) for an inelastic collision. So far, I've looked at Hertzian contact ...
0
votes
2answers
40 views

Realtion of acceleration and deformation [duplicate]

What will happen if I apply 10N force to a body's one end and 11N to it's others end? Which force will accelerate it, which force will deform it? Why?
1
vote
4answers
794 views

Hooke's Law is valid upto what limit?

My textbook states: " the extension produced in the wire is directly proportional to the load applied,within elastic limit." But my Physics professor said that it is valid upto only proportionality ...
4
votes
2answers
139 views

What is the root cause of elasticity of a material?

I know that there exist some interatomic and intermolecular forces in the material but why does stretching a material will enhance attractive force over repulsive force and vice versa.
0
votes
0answers
36 views

Why don't we consider net force while calculating elongation in an object?

I have been studying elasticity in mechanics . Most of my books while solving problems where we have to calculate the elongation in an object due to an external force don't take into account the net ...
2
votes
1answer
58 views

physical meaning of major symmetry of the stiffness tensor

What happens if a stiffness tensor does not have the "major symmetry" $C_{ijkl}=C_{klij}$? Background: In linear elasticity (generalising Hooke's law from a spring to a continuous medium), the ...
1
vote
2answers
228 views

Elongation in bar with unequal applied forces

How is elongation in a uniform rod with unequal forces acting on opposite sides calculated? If applied forces are equal and opposite, the elongation is defined by the formula ($\delta = \frac{FL}{AE}$)...
0
votes
1answer
89 views

Ball suspended on elastic string (finding tension)

A ball (of mass $m$) is suspended by an elastic string. It accelerates upwards with an acceleration $a$. Find the tension in the string. Taking upwards as positive, we have $$T - mg = ma \iff T = m(a+...
1
vote
0answers
47 views

Elastic Plastic with Kinematic Hardening Material Model

I have a model which calculates the rate of deformation tensor using the Green-Lagrange strain rate, the material velocity gradient and the gradient of deformation tensor. $$\bar{\bar{D}} = \bar{\...
0
votes
1answer
96 views

Deformation of an elliptical ring

How will it deform when I compress an elliptical ring along its long axis? For simplicity we could consider that the ring is homogeneous, elastic, has no internal stress at the beginning, and its ...
0
votes
0answers
107 views

Formulae for Elastic Hysteresis of rubber

Being a school student, I'm pretty sure we don't need to explicitly learn any formulae helping us evaluate the energy dissipated by mechanical internal energy in a hysteresis loop. But I was wondering ...
1
vote
0answers
23 views

Role of rubber elasticity in the pressure inside a balloon [duplicate]

I'm just wondering if there's a pressure difference between the atmosphere and the air inside the balloon due to the rubber elasticity. A kind of analogous to the Laplace pressure in soap bubbles.
0
votes
1answer
64 views

Deformation of a rubber ball between planes

I want to know the shape of a rubber ball when it is sandwiched between two (not necessary parallel) plane. If two plane is parallel, I think it is possible to approximate the ball as spheroid and ...
0
votes
1answer
39 views

pulmonary physics: balloons in closed chambers

Imagine we have an expanded balloon with radius $R_1$ and an internal pressure of $+20$ atm, in an room at $0$ atm of pressure. The system is at equilibrium. Now, I drop the pressure in the room to $-...
2
votes
2answers
60 views

What is the mechanism of heat exchange of a bouncing ball?

Imagine a falling ball on a perfectly hard ground. The kinetic energy will be first converted into a deformation of the ball, then the ball will restore it into kinetic and heat energy and recover ...
0
votes
0answers
35 views

Strain problem with diferent forces

Good day to everyone. I had a test a couple of weeks ago and just got it back, and I'm getting a little confuse with a certain question that I thought was answered correctly, so here is it: (roughly ...
0
votes
1answer
47 views

Calculate water pressure in a elastic material cavity

Imagine there is a ball-shape cavity made of elastic material. The diameter of the cavity is 1 cm so that the capacity of the cavity is $\dfrac{4}{3}\pi\approx4.19 \textrm{cm}^3$. Now we pump $5\...
0
votes
2answers
78 views

Point forces in linear elasticity and small strains

Consider a point force $\boldsymbol{F}=F\boldsymbol{e}_z$ in an infinite elastic material. In a linear approximation, the displacements can be calculated using Green's function for the Laplacian which ...
2
votes
1answer
88 views

What determines the rate of vibration decay of a metal?

Suppose we have a tuning fork in a vacuum and strike it. Is there anything in the theory of metals that would predict that the tuning fork's vibration amplitude would decrease with time. Put another ...
0
votes
0answers
34 views

Elastic material with exponential behavior?

I know some constitutive models for elastic materials like Neo-Hooke or Mooney-Rivlin, which give a relation between elongation $\lambda=y/y_o$ (where $y$ and $y_o$ are the length of the elastic ...
1
vote
2answers
52 views

Bending + Contact Force

When we have 2 bodies in contact with each other, for example a book lying on the surface of a table. The table's molecules bend a little bit because of the weight of the book thus producing the ...
0
votes
0answers
26 views

Negative Kinetic energy of normal modes in an elastic solid?

So I'm pretty stupid, admittedly, but I'm also pretty confused. I also fully realize this question is probably completely idiotic. The background is normal modes in linear elastic solids. Let the ...
0
votes
0answers
34 views

Equilibrium and constitutive relation

The constitutive stress-strain relation, say $\sigma=Y\epsilon$ where $Y$ is the Young's modulus, gives you stresses. At equilibrium, force balancing (say, with respect to a internal pressure $p$) ...
0
votes
0answers
31 views

Stress profile of pressurized bent shell

Consider a pressurized cylindrical shell of radius $r$ and pressure $p$, which at equilibrium has a nonvanishing in-plane stress components $pr/2$ and $pr$. This result is generically found by force-...
3
votes
2answers
145 views

Derivation of elastic energy per unit volume

So I basically asked this question a little while back and didn't get much help, but I really need help, so I'm coming back and asking again. Looking at the section on Continuum Systems on the ...
0
votes
0answers
40 views

Mooney-Rivlin coefficients sign

I'm doing a fitting of uniaxial compression data of a isotropic polymer using the Mooney-Rivlin model: $\sigma=\left( 2C_1 + \frac{2C_2}{\lambda} \right )\left( \lambda ^2- \frac{1}{\lambda } \right)$...
-3
votes
1answer
124 views

9/11 attack: How can a whole building fall even though impact only on the top of building? [closed]

The airplane hit the top of the building. After a few time the whole building collapsed. How is this physically possible?
0
votes
0answers
36 views

Strain energy density (potential energy of elastic continua)

This question has to do with writing down the potential energy of an elastic body, which obeys a generalized Hooke's law [; \sigma_{ik} = \sum_{klm} \lambda_{iklm} u_{lm} ;] Where $\sigma$ is the ...
0
votes
2answers
40 views

How does my reference point affect the regresion of data about Hooke's law?

A vertical spring is used (subject to a universal support) whose length is $20$ $cm$ when no force is acting on it. We put on a weight of $1$ $N$ and the new length is $22$ $cm$. When writing the data ...
0
votes
2answers
176 views

Where does the energy go when you stretch a rubber band?

There is resistance when you stretch a rubber band. That makes sense to me because the energy you exert is turned into potential energy of the rubber band, but if you hold the rubber band in the same ...
5
votes
3answers
306 views

gravity delayed by speed of information transfer

A few months ago I had the pleasure of listening to an episode of RadioLab (a very informative podcast I would recommend to everyone) when they had Neil deGrasse Tyson on. He was discussing the very ...
3
votes
0answers
77 views

How to calculate the energy in thermoelastic damping?

Note - I'm not 100% sure *thermoelastic damping* is the right term here - so please feel free to correct the question in case I'm wrong! If a force is applied to an elastic rod such that it ...
0
votes
1answer
363 views

Fundamental frequency of a material and its Young's modulus

I wonder if there is a connection between fundamental frequency and Young's modulus of a material. For example, how to calculate the Young's modulus of a glass bar by knowing its frequency spectrum?
3
votes
3answers
324 views

What does Hooke's law have to do with molecular forces?

In The Feynman Lectures, in the chapter Characteristics of Force, In the section entitled Molecular forces, Feynman talks about the molecular forces, and then he states afterwards: If the ...
0
votes
0answers
30 views

Shear flow in J section type beam

What does the distribution of shear flow look like in a J section type beam. I'm only interested in a qualitative picture of it. I'm not interested in the calculations themselves. It is the top of the ...
1
vote
1answer
273 views

Gough-Joule effect in rubber band

When a stretched rubber band is heated, surprisingly, its tension will increase. What is the physics behind this?! Another thing. The Entropic spring model says, for a good specimen, that the ...
0
votes
0answers
35 views

Specific form of Stokes's differential equation

Coming from a chemical background, I have next to no knowledge of the (as it seems to me) complex field of fluid dynamics, so bear with me here. I'm reading a paper written by seismologist Norman ...
2
votes
2answers
65 views

Is strain always relative to some initial state?

Let us say I am given a material with no knowledge about its history. Can I somehow calculate its strain ? Or a strain is always relative to some initial state (change in length/initial length) ?
0
votes
1answer
42 views

Origin of a unique stress-strain relation

In a paper by Kees Wapenaar titled, "Retrieving the Elastodynamic Green's Function of an Arbitrary Inhomogeneous Medium by Cross Correlation" (2004), the following is stated: "In the space-frequency ...
1
vote
0answers
39 views

When one blows up a latex balloon, why does it get easier to blow once it has a little air in it (after 1 or 2 breaths)? [duplicate]

When one blows up a latex balloon, why does it get easier to blow once it has a little air in it (after 1 or 2 breaths)?
1
vote
1answer
725 views

Bending moment of a cantilever beam

The following procedure is here. Consider a cantilever fixed at one end and loaded at the other one. In cartesian coordinates (if $y$ is horizontal and $x$ vertical, meaning that the load acts ...
0
votes
1answer
116 views

Coefficient of elasticity of the spring?

I know this might sound a silly question though For a spring that is compressed lets say x meters by a force F N. what is coefficient of elasticity of the spring? We are not given the equilibrium ...
2
votes
2answers
295 views

Relationship of the volume of a plumbing system to pressure

How does the volume of water a plumbing system holds vary with water pressure? I know the ratio would include the modulus of elasticity of the plumbing material, the total surface area of the plumbing ...
1
vote
1answer
295 views

A moving brush on a vibrating surface

Hi group, I am a HS student in China preparing for a regional Young Physicist Tournament even. We are very puzzled about why would there be such movement. We would be grateful to see any inspiring ...
4
votes
2answers
200 views

First-principles derivation of cutting force

I know that the amount of force required to separate a material from itself is linked to the surface energy of that material. However, looking at just the surface energy laughably underestimates the ...