0
votes
0answers
3 views

Potential Energy in soilds :: Why are different equations used for deriving lattice constants and for deriving the properties of phonons?

While deriving the equilibrium lattice constants we use expressions for potential like lenard-jones potential which have 6th and 12th order terms or madelung energy for ionic crystals . While ...
4
votes
2answers
84 views

Why are most ferromagnets metals while antiferromagnets are insulators?

This seems to be experimentally true, but I don't quite have an intuition as the why. In the Ising model, we usually consider an insulating ferromagnet if $J>0$, where $J$ is the exchange coupling. ...
1
vote
0answers
63 views

Disclinations, dislocations, lattices, Displacement fields and scaling

I am looking up Frank, and Burger vectors and associated material on dislocation/disclination. It seems straightforward describing a lattice and what dislocation means. It is even possible to restrict ...
0
votes
1answer
34 views

Why do some ionic compounds form in the NaCl structure vs the CsCl structure?

Everything else the same, I'd expect two monoatomic ions to form an ionic structure in the CsCl structure because with more atoms bonded to each atom, it would seem to be more stable. And yet I ...
1
vote
1answer
34 views

Can someone explain LO-TO Splitting?

LO-TO splitting occurs in an ionic (i.e. polar) solid such as GaAs or NaCl. What happens is that the degeneracy of the transverse optical (TO) and longitudinal optical (LO) phonons at $k=0$ is broken ...
4
votes
2answers
253 views

How is Meissner effect explained by BCS theory?

Someone says we can derive the GL equations from BCS theory, which can explain Meissner effect, but I want a more clear physical picture of this phenomena.
2
votes
0answers
39 views

Does the real part of the inverse dielectric function have to be negative at some point for Cooper pairs to form?

Electrons naturally repel one another. However, in a superconductor, a phonon-mediated interaction causes the electrons to have a weak attractive interaction. Suppose that the interaction between two ...
2
votes
1answer
33 views

Is there Johnson noise in superconductor?

For conductor, the Johnson Noise is $v_n = \sqrt { 4 k_B T R \Delta f }$. It is clear that the noise depends on $R$. I'm curious whether this noise will appear in supercondutor? That is for ...
1
vote
0answers
79 views

Energy of an Electron in a One Dimensional Periodic Potential

First, we consider the time independent Schrodinger equation of the form: $$\bigg(-\frac{\hbar^2}{2m}\frac{d^2}{dx^2}+u(x) \bigg)\phi_A(x)=E_A\phi_A(x)$$ Where $u(x)$ is a potential created by a ...
3
votes
0answers
72 views

About SU(2) gauge symmetry of the large U limit of the Hubbard model

I have been studying about the SU(2) symmetry in Heisenberg Hamiltonian with a paper 'SU(2) gauge symmetry of the large U limit of the Hubbard model' written by Ian Affleck et al(Phys. Rev. B 38, 745 ...
2
votes
2answers
39 views

What exactly are crystal planes and how do they reflect x-rays?

What exactly are crystal planes and how do they reflect x-rays? Are crystal planes real physical planes or just an abstract concept? What are these planes made of? If they are an abstraction, what ...
1
vote
4answers
92 views

The conduction electrons in metals is a thermal phenomenon?

When applying an external electric field in a metal at absolute zero, there is electrical current? There must be thermal fluctuations in the electron's band to be occurs current?
5
votes
0answers
71 views

Why do people say “Bosons are either gapped or condensated, except physical principle protected cases (Goldstone boson, photon).”?

Bosons are either gapped or condensated, except physical principle protected cases (Goldstone boson, photon, etc.). I read this in a paper (version1 of http://arxiv.org/abs/1404.3728v1, 1st page 1st ...
1
vote
0answers
51 views

Why does inelastic X-ray scattering probe the longitudinal dielectric function as opposed to the transverse dielectric function?

Light is a transverse wave. Therefore, light in the optical range (i.e. visible light) couples to transverse collective excitations of a material when measuring the optical conductivity for instance. ...
1
vote
4answers
113 views

Ohm's Law: Drude Model

For a very long time now, I've been thinking about the Drude Model derivation of Ohm's Law. I know that a rigorous derivation requires a Quantum Mechanical approach. However, the mere fact that the ...
1
vote
2answers
50 views

Correlation in electron gas

In the textbooks that I read (namely Ashcroft/Mermin , Marder, etc.) it seems that a distinction is made between the correlations in electron gas and a Couloumb interaction between the electrons. What ...
1
vote
2answers
58 views

Thomas - Fermi screening

I read in Ashcroft & Mermin's Solid State text that for the Thomas-Fermi approximation to be applicable, the external potential needs to be "slowly varying," What does it mean for a function (in ...
6
votes
2answers
71 views

Why is the Hubbard model written down so late?

It is just the tight binding model plus on-site interaction. What prevented people from arriving at the Hubbard model?
2
votes
2answers
53 views

Is an object's color/shine/texture dependent on its electrons only? If electrons are same then why are there so many different colors?

when we look at an object be it a metal or a non-metal are we looking at its electrons only, so then if all electrons are same then why do different chemicals or elements or objects have different ...
1
vote
0answers
29 views

Physical, intuitive reason for divergence of dielectric constant at electronic percolation transition?

Several papers such as this (warning, PDF) and this (PDF again) talk about how, near the electronic percolation transition for a metallic 2D film, the real part of the dielectric constant diverges ...
1
vote
0answers
26 views

How to isolate and verify the source of optical absorption/effects?

This is similar to my other question, but not the same -- that one was about the energy ranges of various absorption mechanisms, and this one is more about experimental techniques to find them. Let's ...
1
vote
1answer
47 views

What does it mean for electrons to be “diffusive”?

I'm reading this paper and it has the line (end of 3rd paragraph, page 2): It turns out that the simple fact that electrons are diffusive instead of freely propagating leads to a profound ...
5
votes
1answer
213 views

Numerical analytic continuation for Green's function

Recently, I happened to hear about the possibility of doing analytic continuation numerically. That sounds attractive for the ubiquitous $\mathrm{i}\omega_n\rightarrow\omega+\mathrm{i}0^+$ procedure, ...
0
votes
0answers
9 views

Why are the bounds to the permittivity $\epsilon$ a circular arc in the complex plane?

I'm reading this paper which is essentially about connecting the complex permittivity $\epsilon$ with the microstructure of a thin film. They talk about how you can place limits on the possible values ...
2
votes
1answer
65 views

Hamiltonian for the Periodic Kitaev Model

The Hamiltonian for a system of spinless fermions on a 1D chain (with chemical potential $\mu=0$) is given by $$ H=-\sum_j\left( c^\dagger_{j+1} c_j+h.c.\right)+\Delta \sum_j \left( ...
0
votes
0answers
92 views

Two-Dimensional Tight-Binding Dispersion Relation

As in my last post, I am doing out a calculation in Giamarchi's Many-Body text: http://dpmc.unige.ch/gr_giamarchi/Solides/Files/many-body.pdf. This time, I am going through the derivation of the ...
2
votes
0answers
27 views

In k$\cdot$p theory, how does one calculate the bulk inversion asymmetry coefficients given in table 6.3 in Winkler?

In k$\cdot$p theory, how does one calculate the bulk inversion asymmetry coefficients given in table 6.3 in Winkler? Winkler's book on spin-orbit coupling effects is available free online. In ...
1
vote
0answers
53 views

Should Brillouin zone be a continuous object rather than a discrete one in the thermodynamic limit?

For example, just consider a 1D atom chain with $N$ sites and lattice constant $a=2\pi$, under periodic boundary conditions, the crystal momentum reads as $k=\frac{n}{N}\frac{2\pi}{a}=\frac{n}{N}$, ...
2
votes
1answer
51 views

How does band gap vary with the cell volume?

How does band gap vary with the cell volume? is there a relation? If the volume is compressed, the interaction between atoms would be more, therefore the perturbation is higher hence the splitting ...
2
votes
1answer
81 views

How to calculate energy in two-band Hubbard model

It might be a very easy question for you, but I am confused and I need helps. In the simplest Hubbard model at one-dimensional lattice, I ignore the $U$ term and only remain the hopping term. ...
3
votes
1answer
130 views

What does “optical conductivity” mean?

Does it just mean "AC electric conductivity"? If so, why have a special name for it, and why mention optical specifically? The wikipedia page on it is very sparse. This (warning, PDF) document just ...
2
votes
1answer
69 views

What is $\epsilon_\infty$ in this equation and why can it be neglected in the IR?

I'm reading this paper (warning, PDF) and they mention that the complex permittivity $\epsilon$ and complex conductivity $\sigma$ are related through the equation $$\epsilon - \epsilon_\infty = (4\pi ...
1
vote
0answers
38 views

Wannier functions on a ring

Let's say I have a single particle hamiltonian in a periodic potential. For example a 1D lattice such that: $$H = -\frac{\partial_x^2}{2m} + V(x) $$ with $ V(x+a) = V(x)$ where $a$ is the lattice ...
2
votes
2answers
92 views

Free electron gas in two dimensions

Can someone give a qualitative description on why the density of states for a two dimensional free electron gas is independent of energy while it is not in one and three dimensions? In one dimension ...
2
votes
1answer
61 views

Out-of-Plane Phonons

I am trying to derive the out-of-plane phonon dispersion relation for a membrane. As far as I can tell, one of the simplest ways to do so is with a Lagrangian of the form: ...
1
vote
0answers
68 views

Pseudocubic unit cells: how to construct one?

I keep coming across the term pseudocubic unit cell while reading about orthorhombic perovskite structures. No clear explanation ...
3
votes
1answer
54 views

How can one reasonably theoretically model polycrystalline materials?

Many techniques are taught in advanced solid state courses but they are almost all derived for perfectly crystalline materials. For example, band structure really only appears theoretically when you ...
1
vote
1answer
71 views

Why can't a dislocation terminate in the bulk?

We are told that they can only terminate on surfaces, grain boundaries or other dislocations but we are not told why they can't terminate inside the crystal.
2
votes
1answer
112 views

What does (001) Silicon mean?

If someone gives me a thin film of Si, and they tell me it's (001) Si, does that mean that the (001) planes of Si are the ones making up the surface of the film?
3
votes
1answer
264 views

What is an electron/hole pocket and what is the significance?

What is an electron/hole pocket and what is the significance? I'm trying to get my head around this. I've read what Ashcroft and Mermin have to say on the subject, but it's a little convoluted. They ...
1
vote
2answers
76 views

Is this two forms of Hubbard model equivalent?

I have seen two form of Hubbard model, one is: $$H=-t\sum_{<ij>s}c_{is}^\dagger c_{js}+h.c.+U\sum_i(n_{i\uparrow}-1/2)(n_{i\downarrow}-1/2)-\mu\sum_{is}n_{is}$$ The other is a more familiar ...
1
vote
0answers
38 views

How Does The Macroscopic Wavefunction Build Up?

How does the macroscopic wavefunction (the order parameter) builds up from zero value to the a finite value when liquid He undergoes a transition from normal to the superfluid state? How does it ...
6
votes
2answers
239 views

Symmetry Breaking And Phase transition

Is every phase transition associated with a symmetry breaking? If yes, what is the symmetry that a gaseous phase have but the liquid phase does not? What is the extra symmetry that normal $\bf He$ ...
1
vote
0answers
179 views

Intro to Solid State Physics

I didn't see this listed on the books page so here it is. I'm currently in an introductory Solid State course, and we are using Kittel's book. I have been having a rough time with this book although I ...
0
votes
0answers
48 views

band gaps in tight binding model

What happens at the zone boundaries of the brillouin zones in the tight binding model? How does the band gap originate in the TB model?
0
votes
1answer
87 views

How to obtain band dispersion from a band structure diagram?

Reading about bands dispersion, I came across the following (Computational Chemsitry of Solid State Materials): ...
1
vote
0answers
94 views

Good introduction to many-body Green's function via path integral formulation?

Can anyone kindly provide any information on valuable references or books on this topic? It appears to be prevalent in 90s papers on High-Tc superconductivity or quantum Hall effect, especially in a ...
1
vote
1answer
200 views

Band gaps: are they at the centre or at the edge of the Brillouin zone?

Reading about electronic band structures, I came across the following: Band gaps open at the edges of the Brillouin zone (BZ), since that is where the Bragg scattering occurs. I am slightly ...
1
vote
0answers
74 views

Variational principle

In the LMTO method, the interstitial region is approximated by plane waves and the muffin tin region of the potential by solutions to the radial Schrodinger equation. In using the variational method ...
2
votes
0answers
55 views

Does the Fermi sea have plane waves, or wave packets?

Consider a zero-temperature, one-dimensional crystal with allowed electron momenta $k_n = \frac{2\pi n}{L}$. Question: Which is the more correct way to think about the Fermi sea? Sharp plane ...