Take the 2-minute tour ×
Physics Stack Exchange is a question and answer site for active researchers, academics and students of physics. It's 100% free, no registration required.

Every possible reaction in chemistry is to attain stability. In physics, the alignment of an electric dipole in an external electric field and in all other physical systems (at least those I study in high school) attains stability at the lowest energy state. But, why is it so?

share|improve this question
    
Because the unstable states will simply destroy themselves. –  Arafat Nov 21 '13 at 18:15

6 Answers 6

up vote 3 down vote accepted

To answer your question, you should first understand when is a system most stable.

Firstly it shouldn't have a tendency to move or change state, thus it should be under equilibrium conditions, i.e. the net Force should be zero.

We know that $$F = - \frac{dU}{dx}$$ Putting $F=0$, we get $$\frac{dU}{dx}=0 \tag{1}$$

Secondly, it should be able to maintain that equilibrium condition by itself. This can be tested by displacing the system by a small distance $dx$. If the force on the system then becomes opposite to direction of $dx$, we can say that the system has a tendency to restore back to its original equilibrium position.
An example of this would be a ball kept at the bottom of a spherical valley. Displace the ball a little towards the right, and the net force on it acts towards left, bringing it back to its original position. You will realise that I just described a stable equilibrium condition. What this proves is that it is the stable equilibrium condition in which the system is most stable.

From the above description we have that the small displacement $dx$ and net extra force $dF$ should be in opposite directions.

$$\frac{dF}{dx} < 0$$ $$-\frac{d^2U}{dx^2}<0$$ $$\frac{d^2U}{dx^2}>0\tag{2}$$

From $(1)$ and $(2)$ it is evident that the graph of $U$ should have a minima at stable equilibrium condition, i.e. The Potential Energy should be minimum when a system attains maximum stability.

share|improve this answer

Roughly: Becouse $F=-\overrightarrow\nabla U$, with $U$ some potential energy (coud be an effective potential energy). Then, if you aren't in a minimum of potetial, your system isn't in equilibrium.

Edit: Can you see that 1. and 2. are stables equilibrium?. I chemistry your effective potential energy is some function called Gibbs free energy.

effective potential energy

share|improve this answer
    
But, why is it that the lowest potential state corresponds to the state of stable equilibrium? Can you give an answer without using mathematical results for getting better intuition on the answer provided. –  Rajath Krishna R Nov 21 '13 at 16:05
    
Minimizing Gibbs free energy under constant temperature and pressure is a standard result in thermodynamics textbook... –  user26143 Nov 21 '13 at 16:49

enter image description here

I'll try to explain with the help of an classical example. Take the situations in the picture above. What you're interested in are the first to cases. The unstable state of equilibrium is such a state that when you slightly displace the ball, it departs from the original position. Being at the top of the hill, it has an excess of potential energy (may it be gravitational, electric, etc.) that can be converted into work. However, in stable equilibrium, displacing the ball it will always return to its original position. It was from the start in a state with minimum energy.

share|improve this answer
    
My question is not about the types of equilibrium. –  Rajath Krishna R Nov 21 '13 at 16:02
    
Yes, but i used this example to show why a system is in equilibrium when it is in the lowest energy state. –  Leonida Nov 21 '13 at 16:06

Well, chemical reactions almost always require heat (energy) to take a place, and almost always release heat upon reaction, so by that logic state when elements is unable to keep reacting is a state with insufficient energy or, in other words, lowest energy state (or we probably should say "lower energy state" then one that required for reactions)

share|improve this answer

A system that is in thermal contact with it's environment will tend towards both a lower energy state and a higher entropy state. Basically, the energy of the system + environment is fixed, but energy will flow between the two until they are in a state of maximum entropy.

It might be more informative to ask why systems tend towards increased entropy. What happens is that all the states that the system+environment can occupy with fixed total energy have equal probability of being occupied. This is called the fundamental postulate of statistical mechanics. Now there are many such states for which the system has some particular energy $E$. The value of $E$ that corresponds to the greatest number of states is therefore most likely.

share|improve this answer

Resolving (Decreasing) energy gradients to lower realized potential states is what drives every process on many levels including evolution. www.intothecool.com Here is a super cool paper that shows the process across universal, biological and socio-economic domains. http://journals.cambridge.org/action/displayAbstract?fromPage=online&aid=185965

if you look around using a constrained google search for filetype:pdf you can find it free.

That being said the lowest potential state is likely a lattice at absolute zero with a perfectly isomorphic electromagnetic state. Technically anything less than all matter reaching that state is subject to being just a local equilibria point awaiting a lower (more broadly contextualized) state i.e. ultimate heat death.

share|improve this answer

Your Answer

 
discard

By posting your answer, you agree to the privacy policy and terms of service.

Not the answer you're looking for? Browse other questions tagged or ask your own question.