Physics Stack Exchange is a question and answer site for active researchers, academics and students of physics. Join them; it only takes a minute:

Sign up
Here's how it works:
  1. Anybody can ask a question
  2. Anybody can answer
  3. The best answers are voted up and rise to the top

Is it possible to design a physical experiment that shows that a time limited signal, such as a rectangular pulse is composed of infinite continuous sine/cosine waves?

share|cite|improve this question
this might give you ideas of how to go about it . For a single pulse see . One could build electronic circuits which would reproduce the effect on a screen – anna v Feb 16 '13 at 8:21
I have to say that as described you are talking about a mathematical fact. It not something that is amenable to experimental proof or disproof, it simply is. The experiment asks if the signal does or does not superimpose in linear, non-interfering additive way. You are not testing Fourier decomposition (which is math), but the superposition of your signals (which is a physical property assumed in the mathematics of Fourier decomposition). – dmckee Feb 16 '13 at 15:26
@dmckee Are you saying mathematical "facts" cannot be showed to be true experimentally? – user13107 Feb 17 '13 at 8:13
I am saying that mathematics can be true independently of physics. What you test with the mechanisms suggested below is "Do the physics of the signal include the mathematical prerequisites for Fourier composition?" – dmckee Feb 17 '13 at 16:00
up vote 1 down vote accepted

Idea #2: Build an electronic circuit that separates a periodic input signal (e.g. a square wave) into its component frequencies (using an array of band-pass filters) and then adds these signals back together to get an approximation of the original signal.

share|cite|improve this answer
Thanks. That seems plausible. I am accepting this now but I hope people will still respond with newer ways f showing this. Most of the attempts so far involve electronics. Perhaps someone can come up with an experiment that doesn't involve building circuits. – user13107 Feb 17 '13 at 8:17

A friend of mine did a very similar experiment for his college project. The idea was to test the frequency response of a Hi-Fi amplifier by using a delta function. A true delta function has equal amplitudes of all frequencies, so if you take the amplifier output and Fourier transform it to get the spectrum this immediately gives you the frequency response.

Of course you can't generate a delta function, so what he did was to use a rectangular wave with as low a mark space ratio as he could get. Then by Fourier transforming both the input and output and taking the ratio of the spectra you can extract the frequency response.

As I recall, the experiment worked OK but it was hard to get the input pulse narrow enough to get a really wide frequency range. After all, the range of hearing extends for three orders of magnitude.

share|cite|improve this answer

Idea #1: Build a physical representation of the phasor diagram. Here, each frequency component is represented as a rotating vector, and all of these vectors are stacked end-to-end. In a physical representation, each vector could be a metal bar, and they could be geared to rotate at the correct rates.

share|cite|improve this answer

Your Answer


By posting your answer, you agree to the privacy policy and terms of service.

Not the answer you're looking for? Browse other questions tagged or ask your own question.