Take the 2-minute tour ×
Physics Stack Exchange is a question and answer site for active researchers, academics and students of physics. It's 100% free, no registration required.

I think of building a Tesla turbine out of old hard drives.

Now I wonder how to cut ventilation holes in the platters.

On the internet there are a lot of different attempts on that matter. A lot of people cut 3 arcs of 60° somewhere near the center of the platters, others cut round holes of different sizes inside the platters. But to me it seems like the decission on how to cut the holes, for a lot of people is very much a matter of personal flavour.

I didn't find any information yet on

  1. What's the best shape for the holes
  2. What's the best distance from the center
  3. What's the best diameter for the holes

(if that matters, my hard drive platters have a diameter of 9.5cm, but maybe in the end I will use different ones)

If round holes are not the best solution, I would also be interested on how "bad" it is to make round holes, as I don't have easy access to a rotary table.

share|improve this question
1  
The great many additional names listed in the first paragraph of that Wikipedia article might well lead to some more detailed engineering discussion. –  dmckee Jan 27 '13 at 20:43
    
+1 for alerting me to the machine's existence. I love hearing about Tesla's ideas - it seems it would almost take a lifetime just to get up to speed with them all, let alone think them up originally. –  WetSavannaAnimal aka Rod Vance Jul 7 '13 at 2:11
add comment

1 Answer 1

Here are my two cents: After observing the Tesla turbine I noticed that the force of the air or water input comes from the outer edge of the blades, which lets me to believe that if you place ventilating holes anywhere of the turbines wheels you are dealing with the preasure that accumulates inside the holes regardless the size they have, That is preasure against preasure. I really think that if one placed the input of air or water somewhere in the midle of the turbine intead of the edge one will be able to place the vent holes in the inner half of the turbine. However one will have to attach to the shaft a steel flywheel with three steel weight on the tips of the wheels support to make up for loss of power due to the replacement of input nozzle to the center.

share|improve this answer
add comment

protected by Qmechanic Jul 7 '13 at 6:51

Thank you for your interest in this question. Because it has attracted low-quality answers, posting an answer now requires 10 reputation on this site.

Would you like to answer one of these unanswered questions instead?

Not the answer you're looking for? Browse other questions tagged or ask your own question.