Compound Fish Bowl/Fish Eye Lens System
The bowl would make a compound lens system with the fish's eye. First, I will assume that we have the following indices of refraction :
$$
n_{\text{air}}\\
n_{\text{glass}}\\
n_{\text{water}}.
$$
Usually $n_{\text{air}} \approx 1$, $n_{\text{glass}} \approx 1.5$, and $n_{\text{water}} \approx 1.33$, but I'll work the general problem here. I will assume first order geometric optics in the paraxial approximation for simplicity. If you wanted a more robust answer this system could be modeled and analyzed in an optical ray-tracing program like Zemax or Code5.
We have the following variables besides the indices of refraction shown in the figure below: $t_1$ is the distance from the object to the first spherical glass interface with radius of curvature $r_1$, $t_2$ is the distance from the glass interface to the spherical glass/water interface with radius of curvature $r_2$, and finally $t_3$ is the distance from the the glass/water interface to the front principal plane of the eye of the fish. Note that the green color denotes the glass and the blue color denotes the water.

The following Gaussian optics equations will be used:
$$
\phi = \frac{n_2-n_1}{r}\\
\phi_{\text{tot}} = \phi_1 + \phi_2 - \tau\phi_1\phi_2\\
f_R' = n_{\text{water}}f_e
$$
where $\phi$ is the power of a single surface, $\phi_{\text{tot}}$ is the power of two combined surfaces separated by the reduced distance $\tau = \frac{t}{n}$, and $f_e = \frac{1}{\phi}$ is the effective focal length.
The first step is to calculate the power of the air/glass interface and the power of the glass/water interface:
$$
\phi_1=\frac{n_{\text{glass}}-n_{\text{air}}}{r_1}\\
\phi_2=\frac{n_{\text{water}}-n_{\text{glass}}}{r_2}
$$
This implies that:
$$
\phi_{\text{3}}=\frac{n_{\text{glass}}-n_{\text{air}}}{r_1}+\frac{n_{\text{water}}-n_{\text{glass}}}{r_2}-\frac{t_2}{n_{\text{glass}}}\cdot\frac{(n_{\text{glass}}-n_{\text{air}})(n_{\text{water}}-n_{\text{glass}})}{r_1 r_2}\\
=\frac{n_{\text{glass}}-1}{r_1}+\frac{n_{\text{water}}-n_{\text{glass}}}{r_2}-\frac{r_1-r_2}{n_{\text{glass}}}\cdot\frac{(n_{\text{glass}}-1)(n_{\text{water}}-n_{\text{glass}})}{r_1 r_2}\\
=\frac{n_{\text{water}}n_{\text{glass}}-n_{\text{water}}}{n_{\text{glass}}r_1}+\frac{n_{\text{water}}-n_{\text{glass}}}{n_{\text{glass}}r_2}\\
\approx \frac{0.443}{r_1}-\frac{0.113}{r_2}
$$
since $t_2 = r_1-r_2$, with the last line using the numerical values of the indices of refraction specified above.
Now the fish eye will have power $\phi_{\text{fish}}$, so we can use the Gaussian equations once again:
$$
\phi_{\text{tot}} = \phi_3 + \phi_{\text{fish}} - \frac{t_3}{n_{\text{water}}}\phi_3\phi_{\text{fish}}
$$
Plugging in $\phi_3$ yields:
$$
\phi_{\text{tot}} = \frac{n_{\text{water}}n_{\text{glass}}-n_{\text{water}}}{n_{\text{glass}}r_1}+\frac{n_{\text{water}}-n_{\text{glass}}}{n_{\text{glass}}r_2} + \phi_{\text{fish}} - \frac{t_3}{n_{\text{water}}}\left(\frac{n_{\text{water}}n_{\text{glass}}-n_{\text{water}}}{n_{\text{glass}}r_1}+\frac{n_{\text{water}}-n_{\text{glass}}}{n_{\text{glass}}r_2}\right)\phi_{\text{fish}}
$$
Which can probably be simplified but I'm not going to spend the time to do so. If we plug in some numerical values, including the estimated indices of refraction listed above, we can get an answer:
$$
r_1=100mm\\
r_2=97mm\\
t_2=3mm\\
t_3=97mm
$$
corresponding to a fish bowl 200mm (8in) in diameter, the fish is at the center, and the glass thickness is 3mm. I compute the following values:
$$
\phi_1=0.0050/mm\\
\phi_2=-0.0018/mm\\
\phi_3=0.0033/mm\\
\phi_{\text{tot}}=0.0033+0.7619\cdot\phi_{\text{fish}}
$$
This implies the the effective focal length of the compound system (fish bowl + fish eye) will be
$$
f_{e,\text{tot}}=\frac{1}{0.0033+0.7619\cdot\phi_{\text{fish}}}mm
$$
I found the average focal length for a goldfish eye in
Role of the lens and vitreous humor in the refractive properties of the eyes of three strains of goldfish from Seltner et al (1989)
to be about $3mm$. Then we obtain
$$
f_{e,\text{tot}}=\frac{1}{0.0033+\frac{0.7619}{3}}mm=3.89mm.
$$
What if the fish was really close to the glass, say $t_3=10mm$? Then
$$
\phi_{\text{tot}}=0.0033+0.9752\cdot\phi_{\text{fish}}=0.3284/mm,
$$
i.e.,
$$
f_{e,\text{tot}}=3.05mm.
$$
or if the fish is looking the other way, i.e., $t_3 = 187mm$ then
$$
f_{e,\text{tot}}=5.56mm.
$$
The above is the most extreme case. What is the effect? Note that the above focal lengths are the air (or optical) equivalent lengths and not the actual focal lengths.
Effect of Changing the Focal Length
Most focusing systems (including cameras and eyes) are set up such that the focal length doesn't change a whole lot, and for far away objects not much adjustment is needed to attain focus. We will assume this here (i.e., that the focal plane or lens system, or crystalline lens changes such that the basic focal length remains unchanged to maintain focus). We shall assume that the fish can focus on something normally only $10mm$ away, this would set the range of $z'$ to be $3mm < z' < 4.3mm$.
We now need to calculate the offset of the combined system principal plane from the principal plane of the original fish eye using:
$$
\frac{d'}{n{\text{water}}} = -\frac{\phi_3}{\phi_{\text{tot}}}\frac{t_3}{n_{\text{water}}}\\
\implies d' = -\frac{\phi_3}{\phi_{\text{tot}}}t_3
$$
we assume above that the rear principal plane of the fish eye system is actually in an index of refraction of water. When the fish is at the extreme $f_{e,\text{tot}}=5.56mm$, then
$$
d' = -3.39mm.
$$
When the fish is in the center, then
$$
d' = -1.25mm.
$$
The air equivalent original fish eye had $f_{e,\text{fish}}=3mm$, and the extreme part of the fish on one side of the bowl changed the effective focal length to $f_{e,\text{tot}}=5.56mm$. Let's assume that the fish is viewing an object at $1000mm$ away. We can use the lens equation to get the difference between the two focal lengths.
$$
\frac{1}{z'}=\frac{1}{z}+\frac{1}{3mm}\text{vs.}\frac{1}{z'}=\frac{1}{z}+\frac{1}{5.56mm}\\
\implies \frac{1}{z'}=-\frac{1}{1000mm}+\frac{1}{3mm}\text{vs.}\frac{1}{z'}=-\frac{1}{1000mm}+\frac{1}{5.56mm}\\
\implies z'=3.009mm\quad\text{vs.}\quad z'=5.59mm
$$
which means the magnifications would be :
$$
m_{\text{fish}}=-0.003009\\
m_{\text{tot}}=-0.005591
$$
The new effective focal length must take into account the shift in the principal plane, the focal plane would be located $5.59mm-3.39mm=2.2mm$. This would result in the fish seeing objects at 1000mm as blurry (defocused) outside the bowl, when the fish is near the edge of the bowl and looking through the other side of the bowl, because the fish cannot shift the retina to the 2.2mm position (infinity focus is at the 3mm position). The fish could begin to see things when the compound system has a $z'=3mm+3.39mm = 6.39mm$ which corresponds to $z \approx 43mm$, i.e., when objects are about $43mm$ from the front principal plane in air (I don't know if this would be inside or outside the bowl in physical space, likely inside, so it cannot actually happen).
What about when the goldfish is in the middle of the bowl, i.e., $f_{e,\text{tot}}=3.89mm$? Then something at a distance of $1000mm$ has $z'=3.91mm$, and the focal plane is at $2.66mm$ from the rear principal plane of the original fish eye system. The fish could begin to see things when the compound system has a $z'=3mm+1.25mm = 4.25mm$ which corresponds to $z \approx 45mm$, nearly the same as the extreme case.
In both cases it is likely the gold fish will see objects as blurry.
If the goldfish is only $20mm$ from the edge, then objects closer than about $122mm$ can be seen without being blurry. If he gets right against the edge then the effect is minimized and he can probably see quite far.