Take the 2-minute tour ×
Physics Stack Exchange is a question and answer site for active researchers, academics and students of physics. It's 100% free, no registration required.

I have read that we can charge a capacitor using a battery, but can the vice versa happen? My project needs to show a battery being charged through a fully charged capacitor.

share|improve this question
1  
Well...only until their potentials meet in the middle. –  dmckee Dec 17 '12 at 14:58
2  
Perhaps, you need a laaaaaarger one for that :-) –  Waffle's Crazy Peanut Dec 17 '12 at 15:08

2 Answers 2

Crazy Buddy's answer and related comments have made the point that you could indeed use a capacitor to charge a battery, but the amount of energy stored in capacitors is generally less than in batteries so it wouldn't charge the battery very much.

However there is a new generation of capacitors called ultracapacitors that are being developed with electric cars in mind. See for example this blog or Google to find many such articles on ultracapacitors. It seems likely that if the technology ever makes it into electric cars it will be as a combination of a battery and an ultracapacitor. Since most cars use regenerative braking, the energy generated by the braking would be stored in the ultracapacitor and would then recharge the battery. So this would be an example of using a capacitor to charge a battery.

share|improve this answer

Let's take your question in my thought...

For instance, let us assume that we've got a capacitor of capacitance about some $100 \mu F$ and Also, a commonly used $\text{Ni-mH}$ battery of some voltage $1.5 \text V$ with charge capacities about $2000 \text{mA-h}$

Energy of the battery would be $E=1.5\times 2000\times10^{-3}\times3600$ $$=1.08\times10^4 J$$

I really bet ya that a common capacitor of some micro-farads won't charge upto that energy.

share|improve this answer
3  
Right, let's just say that if the capacity if 100 microfarads, the energy is $Q^2/2C$ so to get 10,800 joules, we need 1.5 coulombs or so. The voltage is $V=Q/C$ which is 10,000 volts or so again. Even if you could charge it this much, it would be pretty bad to connect it to a 1.5-volt battery. To summarize, the charging is only good if the voltage is close to 1.5 volts but capacitors have vastly variable voltage that depends on the stored energy and/or charge dramatically. Normal capacitors store much less energy than batteries because they don't change any chemistry i.e. no "burning". –  Luboš Motl Dec 17 '12 at 16:31
1  
You can buy 2 Farad audio capacitors, and I think these are usually designed for car battery voltage, and I see printed limits of 20 V. That's 800 J right there, although it will cost you $30-40. It's not cheap but it's not crazy. –  AlanSE Dec 17 '12 at 18:23
    
@AlanSE: Thanks to you too Alan for adding up :-) –  Waffle's Crazy Peanut Dec 18 '12 at 2:49
    
thank you for all your answers guys...! –  Momina khan Dec 18 '12 at 15:35
    
How about charging a mobile battery of some 3.7 volts and 6.11 watt hour?? –  Momina khan Dec 19 '12 at 11:13

Your Answer

 
discard

By posting your answer, you agree to the privacy policy and terms of service.

Not the answer you're looking for? Browse other questions tagged or ask your own question.