EDIT: (for my misunderstanding)
The Wikipedia article for Laser shows is far better for this question. As stated there, these holographic films use a passive holographic element which is normally diffractive. Anyways, the material (for any holographic film) is commonly coated with emulsion.
This process turns the conventional "laser pattern" into a random and seamless laser show where each new laser beam is scattered and dispersed over large area
It is difficult for me to delete this long post. Perhaps, users may ignore it...
Holography is generally a gift of LASER. It is basically a lensless photography where the phase of the reflected wave is also recorded along with the amplitude. Normal cameras for 2-D photography records only the amplitude. Whats the point of this?
To obtain a 3-D view of the object by interference and so, it looks like an awesome interference pattern which is called the hologram. When you look through the LASER-illuminated holographic plate, you'd experience the parallax (i.e) When you change the angle of your view, the image will appear differently (i.e) orient accordingly (which gives a realistic experience in 3-D). You may have a look at Wiki for the diagram or my naughty sketch below...
Construction: First of all, you will require a LASER beam to construct a sample holo. Because, laser is extremely coherent. It is made (doesn't diverge so easily) to diverge to fit accordingly with the recording plate. The beam is allowed to fall on the object to be 3-D'fied. Though it's a laser, it is some special form of light (amplified enough). So, it gets scattered from the illuminated object. Now, another beam of the same laser is made to fall on the holo-plate. Both the laser waves interfere each other and produce an interference pattern on the plate which is referred as hologram. This hologram (interfered fringes) contains the information (necessarily phase) of the object.
Now, the image has been recorded on the object. To view it, you'd need the same laser beam. An important thing to note: the orientation of this beam (relative to the plate) should be the same as that of the reference beam used while recording. Or else, distortion of image occurs. As you see through the plate, you could admire at the object as its been floated in colored space (depends on illuminated light).
Note: There are simpler holograms where laser is not mandatory to view atlast. The simplest one is the reflection hologram where normal light could act as a reference beam.
Holographic Plate: (Oops... Sorry, this is what I should've told first)
This film records much finer resolution of light illuminated on it. So, it best suites our holography. Normally, these films use photosensitive emulsions, a kind of liquid-liquid colloid. By the word "photosensitive", I meant silver halide - the same thing used for photographic plates. But here, it captures the interference fringes more finely. The parts which receive more intense light stay somewhat darker while the others stay somewhat lighter. As it is in an emulsion, the scattered light doesn't directly fall on it. Differently oriented waves cause varied interference fringes on the AgX. To obtain the holo-image from it, we have to do a process called bleaching. Sadly, I don't know about it.
But, an article supports these facts.