Sign up ×
Physics Stack Exchange is a question and answer site for active researchers, academics and students of physics. It's 100% free.

I'm unsure of how to calculate the permittivity of a fluid. Permittivity differs from one fluid to another:


Since it is an electrical property combined with an electrical capacity, it is possible to measure it indirectly in a capacitive sensor. I have used a capacitive sensor to measure electric relative permittivity factor of a dielectric medium can be expressed as a ration of capacity, $C_x$ of capacitor, which space between and around the electrodes is completely filled with the medium, to capacity $C_0$ of the same electrodes in vacuum.

$$\varepsilon_r=\frac{C_x}{C_0} $$

I know and measured $C_0$ value. I am facing problems with calculating $C_x$ of capacitor, which space between and around the electrodes is completely filled with the medium. I am using method as described below. I am applying an AC signal ($125\: \mathrm{kHz}$) to the capacitive sensor which is filled with some fluid, in response I am getting AC signal with some phase difference. I am able to measure the amplitudes of sensor input, sensor output signals and their phase difference also. I am trying to make equation that will give $C_x$ value from above known values ($V_g$ (input), $V_r$ (output), $\phi$ (phase difference)).

share|cite|improve this question
Hello Verendra, you can use LaTex-like markup here to print nicer symbols and not having to rely on the - sometimes somewhat limited - unicode symbols. – Claudius Nov 29 '12 at 13:38

1 Answer 1

I would use a capacitance bridge. This is by far the most accurate way to measure capacitance. If you're at a university there's probably someone around who has a commercial capacitance bridge. If not, you can easily make one.

share|cite|improve this answer

Your Answer


By posting your answer, you agree to the privacy policy and terms of service.

Not the answer you're looking for? Browse other questions tagged or ask your own question.