Take the 2-minute tour ×
Physics Stack Exchange is a question and answer site for active researchers, academics and students of physics. It's 100% free, no registration required.

Is there any fundamental physical reason (thermodynamics/entropy?) behind the fact that there doesn't exist home appliance for fast cool down of food/drinks?

I know that there are some methods (liquid nitrogen, etc.) used in the kitchen, but I mean something much more common, like microwave oven but with opposite function.

Update Thanks for the responses so far. I understand that the temperature difference is the key. However, I do not understand why it is so much harder/slower to generate large temperature difference on the cool side?

share|improve this question
1  
Layman intuition: Slow methods of adding or removing heat rely on conduction. Conduction pretty much works both ways. Fast methods (microwave oven) work by firing an energetic beam through the subject and relying on the subject absorbing some of that energy. Unlike conduction this isn't anything like a symmetric process. If there exist beams of negative energy or energetic beams that can extract heat from a rasher of smoked Danish bacon I'd love to know about them. –  RedGrittyBrick Nov 29 '12 at 11:45
add comment

4 Answers

up vote 7 down vote accepted

The problem is that heat flow (in or out of an object) is related to the temperature difference between the object and it's environment. For the sort of cooling usually found in the kitchen (convective cooling) the heat flow, and therefore the rate of temperature change is proportional to the temperature difference.

So let's take some example like a bottle of milk. If you want to heat it quickly that's pretty easy because it's easy to generate a large temperature difference on the hot side. Just burn some gas.

However to cool the milk quickly we need to generate a large temperature difference on the cool side, and that's hard. You mention liquid nitrogen, and indeed that's a good way to cool things quickly. However you're forgetting all the hours the liquid nitrogen supplier had to put in to cool nitrogen enough to make it liquify. In general it's hard to cool things quickly unless you cheat and start with something (like liquid nitrogen) that's already been cooled.

Response to comment:

This started as a comment, but it got a bit involved so I thought I'd put it in here.

The temperature of anything (e.g. milk) depends on how much heat it contains. Let's not get into exactly what heat is, but basically if you add heat it increases the temperature and if you remove heat it reduces the temperature.

The problem is that the milk is surrounded by the rest of the world, and this is around room temperature. Heat won't flow from a cold place to a hot place, so heat won't flow out of the milk into it's surroundings unless we do some work. Typically what we do is use energy to pump heat around. The area we've pumped the heat from becomes cooler and the area we've pumped it to becomes hotter. This is what you do to liquify nitrogen. You have to pump the heat out of it so te nitrogen gets cold and liquifies while the rest of the world gets hotter. Once we have the liquid nitrogen we can use it to cool the milk, but it took a lot of work to make the liquid nitrogen.

If you're interested in pursuing this, the mechanism for pumping heat around is called (unsurprisingly :-) a heat pump. It's basically a heat engine that runs backwards.

Heating things is easy because there are lots of systems that have stored energy that can be easily converted to heat. For example a gas/air mixturer has chemical energy that is converted to heat by burning it. You mentioned a microwave: this uses electricity that came from chemical energy i.e. from a power station burning gas or coal, so the heat froma microwave originally came from chemical energy.

You might wonder why we can't easily convert heat to chemical energy e.g. mix carbon dioxide and water and have it convert to gas and oxygen and cool down in the process. If we could do this it would be an easy way to cool things. The reason why we can't do this is the second law of thermodynamics. Explaining this would be a long essay in it's own right, but in brief it's highly probable that a gas/air mixture will convert to carbon dioxide and water (i.e. burn) but it's very improbable that a carbon dioxide/water mixture would convert back to gas and air.

share|improve this answer
    
Nice answer. I think some sort of reverse microwave cooling would be super awesome. A bit like laser cooling :D –  Lagerbaer Nov 28 '12 at 22:36
    
Thanks for the answer. Do you any insights why it is so much harder to generate large temp. diff. on the cool side? –  user1860087 Nov 30 '12 at 9:52
add comment

When we cool things in the lab using cryogens you often spends days getting to the temperature you want. The freezer in your kitchen is actually relatively fast, safe and very simple. When heat is exchanged from the system you wish to cool, the cryogens evaporate and eventually need to be replaced - this is a real issue for space missions such as Planck.

There are 'closed' cryo-systems but these are a lot more expensive and not so small. The are also Peltier-effect type coolers which have been used in PCs for passive cooling. These are about 5% efficient compared to a standard compression system which is around 50%. They're not too cost-effective to run either! Another rather interesting type of cooling is ADR (adiabatic demagnetization refrigeration) - but this requires a paramagnetic salt being integrated into the sample you wish to cool - not so useful for the kitchen.

As has already been said, in order to cool something down you need a large temperature difference, resulting in a steep thermal gradient. As the system approaches the desired temperature the thermal gradients lessens and the cooling gets gradually slower.

To cool your system you need something which is colder than your system. So for a freezer you might want it at say minus forty degrees. In order to get 'fast' cooling you need to start thinking about liquid Nitrogen, which boils at around minus seventy seven degrees.

share|improve this answer
add comment

Yes, it is heat conductivity (or temperature conductivity, to be exact). If it is low, it makes the transient (cooling) time long.

share|improve this answer
add comment

I have recently seen imported ?Chinese drink can coolers at electronics retailers, so they are available. Don't know about USA/CAN (try Fry's?), but in Australia and UK try Jaycar. They are most definitely utilising Peltier modules. Don't know about the quality of these units or how long they'll last, though.

share|improve this answer
add comment

Your Answer

 
discard

By posting your answer, you agree to the privacy policy and terms of service.

Not the answer you're looking for? Browse other questions tagged or ask your own question.