# Electrostatic notion of voltage as it applies to circuits

I have a question that's been bothering me about electric fields, voltage, and circuit analysis.

Initially, I came to understand voltage as it was taught in the context of electrostatics - through energy analysis. The concept of the electric field as a conservative field makes a lot of sense. No matter what path a charge takes, if it travels from a positive charge to a negative charge in any way (in a dipole situation), it has the same difference in voltage, namely, the voltage between the positive and negative charge.

This concept of voltage seems to take a huge leap when we jump to considering circuits.

The terminals of a battery create an electric field, which tends to move charge carriers from the higher to the lower voltage.

But how can the circuits be of absolutely any shape? If I have an extremely long, convoluted wire, how can we analyze voltage as simply as we can? Imagine a practical situation of a lamp plugged into a wall outlet far across the room. Circuit analysis says that the wall outlet is "at 120V" (AC) and the voltage drops through all resistance in the circuit on its way back to the ground wire. I just have trouble matching up this notion of voltage with the notion of voltage at a point in an electric field. On the other hand, the only way the charges in a circuit move is because of an electric field. Is the electric field just conveniently shaped such that it moves charges along the circuit at every point? What if the wire goes "uphill" and turns momentarily back toward the positive battery terminal but then turns around again. Wouldn't the charges get stuck in the local potential energy well?

-
– Emilio Pisanty Oct 17 '12 at 22:06
@EmilioPisanty: Isn't it a duplicate? – Ron Maimon Oct 18 '12 at 4:59

The plates of a charged battery create an electric field in the space around the circuit and in the circuit itself. At every point in the wire, this field "instructs" charged particles to redistribute themselves. This redistribution gives rise to another electric field that eventually combines with the battery's field to create a net uniform electric field inside the wire. It is this final uniform electric field which drives the current (causes mobile charge carriers within the wire to move). This feedback process is driven by surface charge redistributing itself on the wire's surface. The most astounding thing is that this entire process happens every time the wire's shape changes, and it happen VERY quickly. See the relevant chapters of Matter & Interactions by Chabay and Sherwood (3rd edition, Wiley, 2011) for details. This the only introductory text I know of that deals with surface charge gradients in circuits, and thus is the only one that correctly explains the underlying physics.

By the way, one shouldn't use the word "voltage" because it can mean either electric potential or electric potential difference. The two are very similar, and are related, but are not the same thing. You would never ask someone their "yearage" would you? It's never appropriate to use a unit in place of the quantity that carries that unit. Voltage shouldn't be used. Use either electric potential or electric potential difference for clarity.

-

The electric field lines shown in your diagram are for the electrostatic case of two oppositely charged circles.

When analyzing even the simplest direct current (DC) circuits, it is important to realize that the situation is non-electrostatic, since charges are moving through the conductor.

The essence of circuit theory can be understood with reference to Kirchoff's circuit laws, which were devised some years prior to Maxwell.

• Kirchhoff's Current Law: Sum of currents entering a node is zero.

• Kirchhoff's Voltage Law: Sum of voltages around a circuit is zero.

Of course, these laws are embodied in Maxwell's equations, as we can see from the Maxwell-Ampere law:

$\nabla\times\textbf{E}=\dfrac{\partial\textbf{B}}{\partial t}$

or in integral form,

$\oint \textbf{E}.d\textbf{l} = \iint \dfrac{\partial \textbf{B}}{\partial t}.d\textbf{S}$

Which, for electrostatic and magnetostatic (DC current) cases, become:

$\nabla\times\textbf{E}=0$

or in integral form,

$\oint \textbf{E}.d\textbf{l} = 0$

This means that the electric field is conservative in these cases. That is, we can define a scalar function (the electric potential, V), where:

$\textbf{E}=-\nabla V$

In the absence of any other forces or constraints, a small positive test charge will follow the path shown by the blue line, so the electric field lines indicate the path that a 'free' charge will take. Note that there are not normally any 'free' charges in the air, as the air is a dielectric (insulator).

Now suppose a lamp is connected to the terminals of the charged battery by two pieces of resistive wire along some arbitrary path. Assume also that the overall charge of the battery/wire/lamp system is neutral.

When the wire is connected to the charged battery terminals, the electrons move along the wires and through the lamp, although they experience some 'resistance' due to 'frictional' forces within these conductors which reduce the mobility of charge carriers. These frictional forces are generally proportional to the velocity of the charge carrier and result in heat dissipation in the wire and lamp, as well as light being emitted by the lamp filament.

Whilst the battery continues to pump charges, a charge gradient is maintained along the length of the wire, with higher concentration of net positive charges near the positive terminal, dropping to zero at some intermediate point along the wire and then decreasing further to net negative charge further along the wire toward the negative terminal. Where the wire 'doubles back' toward the positive terminal, a slight positive net charge density concentrates at the outer surface (furthest away from the positive terminal) whilst further along at the next bend, a slight negative net charge density concentrates close to the positive terminal, thereby maintaining an weak electric field along the length of the wire and allowing current to flow back to the battery.

Note that whist the current flows through the wire, the electric field outside the wire is distorted with respect to the electrostatic case, due to the charge concentration at the surface of the bends in the wire.

This is analogous to a river meandering down a gentle slope. Just as the flow of water carves out the path of a river, so too the flow of current through a wire creates an electric field. Under high current flows, the change in momentum of the water around a bend results in a higher thrust force and hence pressure on the outer bank of the river. As long as current flows through the wire, there is a slight but steady (monotone) drop in potential along the length of the wire from positive to negative, despite the wire doubling back towards the positive terminal, because the current in the wire alters the charge distribution and hence the electric field (forces) and potential gradient (pressure) along the wire.

-