Take the 2-minute tour ×
Physics Stack Exchange is a question and answer site for active researchers, academics and students of physics. It's 100% free, no registration required.

If I had a piece of metal and i wanted it to be negatively charged. How can I do that?

share|improve this question
add comment

4 Answers

up vote 2 down vote accepted

Electrostatic Induction is good to use. It's the phenomenon of inducing electric charges without any direct contact with a charge. This principle is used in capacitors. Even, Rubbing materials produce static electricity. Insulators could be charged by rubbing. But, Metals are probably charged using insulators..! When you bring a charged plastic or glass rod (probably negatively charged) near a metal piece positive charges which experience attractive Coulombic force move towards the end of metal nearer to the rod, while negative charges move to the other end due to repulsive force. If you ground the metal piece, negative charges flow to ground while positive charges stick to the end (due to attractive force)... However after removing the ground, the positive charges are distributed throughout the metal piece.

Edit: After charging Insulators, charges could be transferred from Insulator to your metal piece by simply touching it..! (Thanks to @John)

Also, Van de Graaff Generator is based on both Electrostatic induction and Corona discharge (Action of points) to produce high voltage of the order of $10^7V$. But, it's been in use to accelerate ions for nuclear disintegration purposes instead of charging metal pieces..!

share|improve this answer
    
Is there anyway to make an object permanently charged ? If not permanent , can it be charged fot long periods of time, say 1 hour? –  Abdelrahman Esmat Sep 26 '12 at 20:43
    
Induction is permanent. But, until you touch it with some neutral substances..! Here's a paper that might be of interest regarding static induction... –  Waffle's Crazy Peanut Sep 27 '12 at 1:50
    
Induction only works if you already have some charged object generating an electric field. You bring the charged object up to whatever you're trying to charge. So you've really only pushed the problem of generating charge back one step. –  John Rennie Sep 27 '12 at 9:49
    
@JohnRennie: Hello John, The most necessary thing that need to be noticed is: Charges could be produced in insulators by rubbing (frictional electricity, as I'd say...) So, rubbing either a glass rod with silk or ebonite with fur and then use the insulator to induce charges in the metal piece... –  Waffle's Crazy Peanut Sep 27 '12 at 12:13
1  
Ok, but once you've charged your glass rod just touch it to the metal and charge will flow off the rod and onto the metal (this what a Van der Graff generator does). You don't need to use the rod to induce a charge on the metal. –  John Rennie Sep 27 '12 at 13:22
add comment

Previous posters have explained how to charge objects using various methods.

As metals are conductive, they cannot be permanently charged: the charge will leak away when it touches other things. The only way to keep it charged is to mount it on an insulator, but as no insulator is perfect, the charge will still leak away eventually. Even with a perfect insulator, charge will leak away through the air, so you also need to mount it in vacuum. You would need to keep the voltage low enough so the charge does not arc over to the surroundings.

There are materials, called electrets, that can keep an electric charge semi-permanently. The are special insulators that are charged by an electric field at high temperature. When the temperature drops, they keep their charge. While the charge does leak gradually, the best ones will keep a useful charge for many years. They are used in items like microphones.

A quick google search gave an article on making your own electret.

share|improve this answer
add comment

You don't say what sort of voltage you need. There are electronic circuits that can give you in the range of up to 50 KV. If that is the case the maybe ask in the electronics forum.

share|improve this answer
add comment

There are many ways to charge a piece of metal, but they tend to be variations on the principle used by a Van der Graaff generator. When you run two materials together you will usually transfer electrons from one to the other. Which way the electrons go depends on where the two surfaces are in the triboelectric series. Rubbing materials directly on the metal tends not to work as the charge simply flows off again. Typically you charge an intermediary object then touch that to the metal to charge it.

Alternatively find a radioactive beta emitter and point it at the metal then wait a long time.

share|improve this answer
add comment

Your Answer

 
discard

By posting your answer, you agree to the privacy policy and terms of service.

Not the answer you're looking for? Browse other questions tagged or ask your own question.