Take the 2-minute tour ×
Physics Stack Exchange is a question and answer site for active researchers, academics and students of physics. It's 100% free, no registration required.

A train heads from Station A to Station B, 4 km away. If the train begins at rest and ends at rest, and its maximum acceleration is 1.5 m/s^2 and maximum deceleration is -6 m/s^2, what's the least time required to complete the journey?

My attempt at a solution: I assumed the acceleration function, $a(t)$, has a jump discontinuity at some time, say $t_1$, where it jumps from 1.5 to -6. Under this assumption, it's easy to use the velocity boundary conditions to get the total time $t_f$ is $\frac{5}{4}t_1$, because the velocity $v(t)$ for $t>t_1$ is just $1.5t_1-6(t-t_1)=7.5t_1-6t$. Setting this equal to 0 at $t_f$ gives this result.

The position $x(t)$ for $t\leq t_1$ is just $\frac{1}{2}(1.5)t^2$ and for $t>t_1$ it's just $\frac{1}{2}(1.5)t_1^2+(1.5t_1)(t-t_1)-\frac{1}{2}(6)(t-t_1)^2$. Using the fact that $x(t_f)=4000$, and substituting $t_f=\frac{5}{4}t_1$, I find $t_f\approx 86.06$ seconds.

But my teacher's solution says the minimum time is $81.65$ seconds. Who's wrong? Is my assumption about the jump discontinuity of $a(t)$ what's wrong?

share|improve this question
    
Hi symplectomorphic, and welcome to Physics Stack Exchange! I changed the formatting of your question a bit to make it easier to read. –  David Z Sep 26 '12 at 3:38
    
I think your change of title is misleading -- it's a much less interesting question. The question is a brachiostone-style time minimization problem: the point of putting "time minimization" in the title was to bring out this connection. –  symplectomorphic Sep 26 '12 at 3:39
    
brachistochrone* –  symplectomorphic Sep 26 '12 at 3:41
    
Ah, well, that didn't seem clear to me. Feel free to change the title (or more of the post) to reflect what you wanted it to ask. (It's highly recommended, but not required, to make the title a question that corresponds to the main thing you are asking.) –  David Z Sep 26 '12 at 3:52

1 Answer 1

up vote 1 down vote accepted

I agree with you that the distance travelled up to the changeover point is:

$$ x = \frac{1}{2}a_1\left(\frac{4t_f}{5}\right)^2 $$

but what I would do next is start from the other end and point out that:

$$ 4000 - x = \frac{1}{2}a_2\left(\frac{t_f}{5}\right)^2 $$

adding these together and rearranging gives:

$$ t_f = \sqrt{\frac{50 \times 4000}{16a_1 + a_2}} \approx 81.65 $$

so your teacher is indeed correct (it had to happen one day :-). Your equation for the total distance:

$$ 4000 = \frac{1}{2}(1.5)t_1^2+(1.5t_1)(t-t_1)-\frac{1}{2}(6)(t-t_1)^2 $$

looks fine to me, so I'd guess you just made a mistake in the algebra.

share|improve this answer
1  
Found my algebra mistake after reading through my work for about the fiftieth time. Thanks for confirming I wasn't losing my mind about the general approach. –  symplectomorphic Sep 26 '12 at 6:42

Your Answer

 
discard

By posting your answer, you agree to the privacy policy and terms of service.

Not the answer you're looking for? Browse other questions tagged or ask your own question.