Take the 2-minute tour ×
Physics Stack Exchange is a question and answer site for active researchers, academics and students of physics. It's 100% free, no registration required.

When I sit in a room I can hear voices coming from the adjacent room but the light in adjacent room does not enter my room i.e. sound waves travels through the wall but light waves can't. Why?

share|improve this question
add comment

3 Answers

If you can hear voices (higher frequencies) then the sound is likely not going through the wall, but instead through tiny cracks or air passages. These could include the crack under a door or even the crack surrounding the door in the frame itself. Any exposure like this can allow sound to pass, albeit perhaps at a lower level. If you really had a solid wall, with no cracks whatsoever, you might he the bass tones of speech, but could probably not discern a conversation. Thick walls pass lower frequencies better than higher ones.

share|improve this answer
add comment

Whether any form of wave can pass through an object depends on how strongly that wave is reflected, scattered or absorbed.

Sound waves are certainly reflected by a wall, otherwise you wouldn't hear an echo from it, but not all the sound is reflected so some travels into the wall. Whether the sound is scattered and/or absorbed in the wall depends on what the wall is made from. Remember that sound is a mechanical vibration. The sound hitting the wall makes the wall vibrate and the other side of the wall makes the air on the other side vibrate. A good solid wall won't disperse the vibrations too much, so you will get some sound through it. A wall filled with e.g. fibreglass insulation, will absorb the sound far more, so it will transmit less sound.

Light is also reflected by a wall, otherwise you wouldn't be able to see it. How much light is reflected depends on the wall: a white painted wall will reflect more of the light than a black painted one. However the dominant interaction with the wall is probably scattering. If the wall was made of glass then obviously the light would pass through it. A concrete wall is made from miniscule grains of calcium carbonate and aluminosilicates, and while these materials are transparent to visible light, reflections from all those grain boundaries scatter light strongly. If a concrete wall was very thin e.g. 0.1 mm you would still get some light transmission through it.

Response to Zeynel's comment:

Consider a microphone. Sound waves consist of to and fro oscillations of air molecules, and if you sit at a fixed point in space these to and fro oscillations create oscillating pressure changes. A microphone works because when the pressure is high is pushes the sensor in the microphone back, and when the pressure is low it pulls it forward. The end result is to make the sensor in the microphone oscillate in time with the wave, and in the microphone this movement is used to create an oscillating electric field.

A microphone is designed to be very sensitive to changes in air pressure, and a wall is not. Nevertheless, even a solid wall is elastic in the sense that it deforms when you push on it. So a wall will also move in response to the oscillating pressure created by a sound wave. It will move much, much less than a microphone sensor, but it will move. If the side of the wall facing the sound wave oscillates then obviously the of the wall will oscillate as well. This behaves like a loudspeaker, i.e. the opposite of a microphone, as the oscillating surface of the wall creates an oscillating pressure in the air next to it, and this creates a sound wave. That's how the sound gets through the wall.

Re your last comment "if we said some of the sound waves passes through the wall": you need to remember that a sound wave is not a thing. It's just the movement of something else. In air a sound wave is a movement of the atoms in air, and in a wall a sound wave is the movement of the atoms in the wall. It's true to say that the sound wave passes through the wall, but it's the vibration that moves through the wall not anything you could point to. In this respect sound is completely different to light, where in principle you could follow a photon as it moves between different media.

share|improve this answer
    
I am curious about this question but how "the sound hitting the wall makes the wall vibrate and the other side of the wall makes the air on the other side vibrate..." does not make sense to me. How can the sound wave make the brick wall vibrate enough for us to hear the sound waves created by it? –  Zeynel Sep 21 '12 at 0:57
    
It would make more sense to me if we said some of the sound waves passes through the wall –  Zeynel Sep 21 '12 at 0:58
    
@Zeynel: The brick wall just vibrates less, and carries less of the energy, but even small vibrations in a stiff wall carry sound energy. The sound "passing through the wall", and "the wall vibrating in response to the sound" are synonyms. –  Ron Maimon Sep 21 '12 at 6:42
    
@John Rennie: do you think it is possible to compute the pressure exerted by sound waves on a wall so that we can look at some numbers? –  Zeynel Sep 28 '12 at 0:04
    
Yes, see en.wikipedia.org/wiki/Sound_pressure –  John Rennie Sep 28 '12 at 5:40
add comment

This is because the wavelenghth of sound is greater than the wavelength of light. High wavelength radio waves can easily be recieved in a closed building, at the same time ultrasound would not pass obsatcles separating two rooms.

In general, waves can pass through obstacles that are comparable with the wavelength in dimentions.

share|improve this answer
2  
That's not true--- you can bounce radar off a thin wire mesh. –  Ron Maimon Sep 21 '12 at 6:43
    
@Ron Maimon if the mesh has holes not greater than the wavelength and dimentions not smaller than the wavelength. –  Anixx Sep 21 '12 at 12:57
    
Not true. Light travels through vacuum and not sound regardless of wavelength. Similarly through matter light can pass through some materials and not others, and sound passes better through some and worse through others. –  ja72 Sep 21 '12 at 14:08
    
i guess @Anixx is talking of diffraction –  Shuvaban Dey Sep 21 '12 at 17:30
1  
While not 100% correct, this answer provides an interesting insight: typical wall has a thickness of 1/10th of acoustic wavelength. If you would take a metal layer that is 50 nm thick (1/10th of green light), it will be partially transparent. –  gigacyan Mar 14 at 7:51
add comment

protected by Qmechanic Mar 14 at 6:51

Thank you for your interest in this question. Because it has attracted low-quality answers, posting an answer now requires 10 reputation on this site.

Would you like to answer one of these unanswered questions instead?

Not the answer you're looking for? Browse other questions tagged or ask your own question.