# Reflection of Electromagnetic Waves

Visible light - Being an Electromagnetic wave is reflected by glass (take mirror). Would all other waves in the electromagnetic spectrum be reflected in the same way by our simple mirror... For highly intense X-Rays & gamma rays, take that the mirror is more stronger such that it could resist for at least 30 seconds. Well If the mirror would reflect, then would the EM waves be the same after several (take 30) reflections..?

(At each reflection, the photons scatter in different directions... Would the intensity and energy of EM waves remain same?)

-

A metal (read mirror) behaves rather differently depending whether the frequency of the incoming light is above or below the plasmon frequency.

• if the frequency is below the plasmon frequency, the electrons move in order to screen the electric field. This yields an approximate boundary condition $\mathbf E|_\text{boundary}=0$ and thus to reflection.

• if the frequency is above the plasmon frequency, then the electrons cannot move (because of their inertia) and the wave essentially just goes through (just like in an ordinary dielectric).

As the plasmon frequency for typical metals is around $10^{15}\,$Hz, visible light is reflected and $X$-ray is transmitted.

-
What I was explaining is the result of the so-called Jellium model. In this model the charge of the ions is uniformly spread throughout the metal. In reality, the ions form a crystal which leads to diffraction but not total reflection. –  Fabian Aug 29 '12 at 9:31

An electromagnetic wave reaching an interface is partially reflected, partially refracted. The fraction of it that gets refracted, i.e. the transmission coefficient, and the fraction of it that gets reflected, i.e. the reflection coefficient, depend on a number of things:

• the refractive indices of both media,
• the incidence angle, and
• the polarization of the light.

Although the frequency of the electromagnetic wave does not come up explicitly here, it does implicitly through the refractive index, which varies with frequency, a phenomenon known as dispersion.

Once you have figured the refractive indices of your media for a given frequency, all you need is Fresnel's Equations to figure out what happens to your waves. At each reflection, only a fraction of the incident light will be reflected, and the fraction will be different for different polarizations. So the light after the first reflection will be less strong, and polarized differently, than before reflecting, and the differences will pile up after a few reflections.

Furthermore, if your reflections are not isolated, but happen between parallel surfaces, you can have interference between the various incident, refracted and reflected beams, leading to a further dependency of the outcome on wavelength. This is what makes soap bubbles iridescent, for example.

There really is no shorter answer to your question other than: find out what the refractive index for your frequency of choice is, work out the details, find out what happens...

-