Take the 2-minute tour ×
Physics Stack Exchange is a question and answer site for active researchers, academics and students of physics. It's 100% free, no registration required.

I have a slight difficulty understanding the solution to the following problem:

A light inextensible string with a mass $M$ at one end passes over a pulley at a distance $a$ from a vertically fixed rod. At the other end of the string is a ring of mass $m(M>m)$ which slides smoothly on the vertical rod as shown in the figure. The ring is released from rest at the same level as the point from which the pulley hangs. If $b$ is the maximum distance the ring will fall, determine $b$ using the principle of virtual work.

The solution is:

Let $l$ be the length of string. Therefore,

$$x+(a^2+b^2)^{1/2}=l\tag{1}$$ Imagine a vertical displacement $\delta b$ of the ring along the rod.

$$\delta x+b(a^2+b^2)^{-1/2}\delta b=0\tag{2}$$ Therefore, $$\delta x=-b(a^2+b^2)^{-1/2}\delta b$$

The constraints over the pulley and rod do no work. By the principle of virtual work, $$Mg\delta x + mg \delta b=0$$ Substituting value of $\delta x$: $$-Mgb(a^2+b^2)^{-1/2}\delta b = -mg\delta b$$ Since $\delta b$ is arbitrary, $$b^2=\frac{m^2}{M^2}(a^2+b^2)$$ $$b=\frac{ma}{(M^2-m^2)^{1/2}}$$

My questions are:

  1. How is Equation 2 obtained from Equation 1? (especially with regard to the intermediate steps)
  2. When I attempted the problem, I had the tension in the string doing work, because the displacement of the string is in line with the tension in the string. Why is this not being considered? Thanks in advance.

setup of problem

share|improve this question
add comment

2 Answers

up vote 1 down vote accepted

For your first question: obtaining equation (2) from (1) is basically just a matter of taking the derivative. Consider this expression that relates an infinitesimal change in the value of a function $f(x,b)$ to the infinitesimal changes in the values of its arguments:

$$\delta f(x,b) = \frac{\partial f(x,b)}{\partial x}\delta x + \frac{\partial f(x,b)}{\partial b}\delta b$$

If you've ever done anything with uncertainty analysis, in particular error propagation, you should be familiar with this sort of thing, but if not, it's still not too complicated - it's just the chain rule of multivariable calculus. Try plugging in the left side of equation (1) for $f(x,b)$ and see that it works out.

A different way to do the same derivation is to consider the right triangle whose legs are formed by the rod and the "ceiling" and whose hypotenuse is formed by the string. Originally, the triangle has side lengths $a$, $b$, and $l - x$; after an infinitesimal displacement of the system, it has side lengths $a$, $b + \delta b$, and $l - x - \delta x$. Using the Pythagorean theorem on the first set of lengths, you get

$$a^2 + b^2 = (l - x)^2$$

and on the second set of lengths, you get

$$a^2 + (b + \delta b)^2 = (l - x + \delta x)^2$$

Try combining these to see that you get equation (2) out of it. Remember that because the $\delta$ quantities are infinitesimal, you can ignore terms involving $\delta x^2$ and $\delta b^2$.

As for the second question: probably the easiest way to think about it is that for a static system, the principle of virtual work is equivalent to potential energy minimization. To find the state of the system, you find what values of the coordinates minimize the potential energy, which in this case is $-Mgx - mgb$. Ordinarily, when you want to minimize a function, you take the derivative and set it equal to zero, but you can just as well calculate an infinitesimal change using the formula above and set that equal to zero. Try setting $f(x,b)$ in that formula equal to the potential energy.

If you're still concerned about tension, though, you could make the following argument, staying true to the spirit of virtual work. As the ring moves downward by a small amount $\delta b$, the work done on it is

$$\delta W_m = mg\delta b - T\sin\theta\,\delta b$$

where the factor $\sin\theta = \frac{b}{\sqrt{a^2 + b^2}}$ picks out the vertical component of the tension.

As this happens, the string gets pulled through the pulley, thus raising the larger mass by a displacement $\delta x$. The work done on the larger mass is going to be

$$\delta W_M = -Mg\delta x + T\delta x$$

When the system is in equilibrium, it will be in a state such that the no work gets done if it shifts a tiny amount in either direction. That means that the total work for an infinitesimal displacement should be zero,

$$\delta W_m + \delta W_M = 0$$

Using this and equation (2), namely $\delta x = -\frac{b}{\sqrt{a^2 + b^2}}\delta b$, you can show that the two tension terms, one from $\delta W_m$ and one from $\delta W_M$, cancel out. Any work done by the tension on one mass is canceled out by work done by tension on the other mass. So even if you don't actually take the tension into account, you still wind up getting the right result.

share|improve this answer
Thanks! It makes more sense now. –  Joebevo Jul 26 '12 at 10:22
add comment

What I recommend to you is, please come up with your solution and put it here. Then we can let you know where you had done the mistake. However, since you also said that - you had a problem in understanding the solution of the above problem...I will try my best to make you understand this solution.

When you look into the problem carefully (as he was asking you to determine $b$, you should understand and write the equations in which $b$ is involved as the parameter. By taking the Pythagoras Law,

$\text{Sum of the square of the Hypotenuse = Sum of the squares of the other two adjacent sides}$

Here in the problem, it is given that $a$ and $b$ are the lengths of the two adjacent sides of the triangles. And the third side can be determined by using the Pythagoras theorem. (i.e) $(a^2+b^2)^{1/2}$.

But, you should understand that there is an also extra length in addition to that, which is connected to the block of Mass $M$ and this length was given as $x$. $$\implies x + (a^2+b^2)^{1/2} = l$$.

But a small displacement in length $b$, should strike in your mind about partial differentiation. And in addition to this, you should also understand that the parameters which change during the SMALL vertical displacement are $x$ and $b$. So you should differentiate the above equation with respect to $f(x,b)$ [function with respect to x and b, where the function is the equation].

And the rest is obvious. I hope you might have understood this solution now.

share|improve this answer
Hi Sai, Welcome to Physics.SE. First of all, this is a site which deals with conceptual Q&A. As a new user, you should consider reading our FAQ and also our homework policy. Our site also supports a new Latex feature - "MathJax" equations. You could have a look at my revision of your post :-) –  Waffle's Crazy Peanut Dec 22 '12 at 12:49
add comment

Your Answer


By posting your answer, you agree to the privacy policy and terms of service.

Not the answer you're looking for? Browse other questions tagged or ask your own question.