# Why is there a difference between additive and subtractive trichromatic color theories?

Helmholtz distinguished between additive and subtractive trichromatic color theories.

Additive theories concern optical combinations of colored light sources and are usually modelled on RGB while subtractive theories model pigment mixing and are usually modelled on RYB or CMY.

What is the physical basis of this distinction?

-
–  Qmechanic Apr 16 '12 at 7:43

This is indeed the same as the question mentioned by Qmechanic, but I'd like to add a quick comment that I think is helpful and isn't clear from the previous discussion:

There are two ways of seeing colours:

1. emission - the object emits light e.g. LED displays
2. reflection - the object reflects light e.g. painted surfaces

Emitters like LED displays can usefully be described using this scheme because they emit light from red, green and blue display elements. The primary colours are red green and blue and these can be mixed in any combination to produce the colours we see.

Reflectors like painted surfaces work by absorbing parts of the white light that falls on them. So for example a surface we see as red appears to be read because it absorbs (i.e. subtracts) green and blue light. The only light that reflects off the surface and enters our eyes is the light that is not absorbed i.e. red. The primary colours are the colours that absorb only one part of the light e.g. cyan absorbs just red light, magenta absorbs just green light and yellow absorbs just blue light.

This I hope makes clear why we use the terms additive and subtractive, and why we usually (but not always) use RGB ffor emitters and CMY for absorbers.

-

The difference lies in the word additive and subtractive themselves....

additive colors are colors which are "pure", i.e. colors add up to form white light. A RED light looks RED because it emits RED light.

while subtractive colors are "impure". You perceive RED pigment to be RED because it reflects RED light and absorbs everything except RED light falling on it.

Now imagine a superposition of RED + GREEN subtractive colors, what would be the resultant color?? Since RED color will absorb everything non-RED = GREEN and GREEN would adsorb everything GREEN. what you would get would be BLACK.....

This is counter to if you would have RED + GREEN additive colors, wherin one will see YELLOW color.

-

I thinks that color questions, however fascinating, have little to do with physics, but let's admit for a while that color sensation is solely given by physical properties of light (its frequency) coming to your eye.

RGB vs. CMY are not competiting theories but rather two most common practical ways how to create an color image (for practical reasons, CMY is extended to four colors and becames CMYK). The main difference is that while RGB starts with darkness (black) and you gradually add light, an CMY(K) image requires to be illuminated by white (in some sense complete or all-inclusive) light (with virtually all visible frequencies in proper mixture or ratio) to be visible and seen in originally intended color - CMY(K) pigments subtract some portions of the white light.

By the way all the glossy magazines and books in full color printed with CMYK technology require not only white light but also white paper - CMYK pigments are transparent and filter first the incoming white light and than the rest of it reflected back to your eye from the white paper.

-