Okay, so everywhere I've read, I hear the main difference is the requirement of a medium. But for example, if you take the case of heat 'radiating' from a red-hot iron, isn't that actually convection and not radiation? I mean, isn't the temperature difference between the surrounding air and the iron causing the air to gain heat?
To pretty much everything you stated in your question, "no".
That convection requires a medium is not the main difference, it is simply the most obvious aspect of what is a fundamentally different mechanism for transfering energy. Convection is the transfer of energy by movement of a medium, whereas radiation is the transfer of energy by, well, thermal radiation. Conduction also requires a medium, but, again, it is a fundamentally different mechanism than either convection or radiation; in this case it is the transfer of energy through a medium.
Unfortunately, analogies are hard but if you can visualize the particles involved, it would help. Picture the red hot iron you mentioned. On a molecular level, the material is emitting lots and lots of photons (hence why it is glowing red). The creation of these photons takes energy; energy from the heat of the iron. These photons leave the iron, pass through the environment, and eventually collide with some other object where they are absorbed and deposit their energy. This is radiative heat transfer. If that energy is deposited on your retina or a CCD (like in a digital camera), an image forms over time. This is how infrared goggles work and they would work equally well in high vacuum as here on earth.
In conduction, the next simplest example, there is no generation of photons (physics nerds forgive me for the sake of simplicity). The individual atoms in the object are vibrating with heat energy. As each atom gains energy from it's more energetic neighbors, so it gives up energy to its less energetic ones. Over time, the heat "travels" through the object.
In convection, the molecules of gas near the object gain energy, like in the conduction case, but those same molecules that gained energy then travel through the environment to some other location where they then give off their heat energy.
I will try to explain in simple words.
Every body which has a temperature above 0 Kelvin gives out (ie. radiates) some heat in the form of waves. (So, even we radiate!) Of course, the amount of this radiation depends on the temperature, so the more the temperature of the body, the more heat it gives out. Now, since this heat energy travels in the form of waves, it does not necessarily require any medium to travel. So, it can travel in any/no medium.
I will try explaining convection using a simple example.
Consider a beaker of water being heated from the bottom. The water in the lower region gets heated up, becomes lighter in weight, and hence comes to the top. Now the (relatively) cooler region of water on the top comes down and begins to heat up. Now, again it gets heated up, and moves up when it becomes lighter than the (previously heated) water on the top, but this time getting more heated that the water on the top. This process continues, and eventually every molecule of water gets heated up.
As you can see, in this process, the motion of the particles lead to the heating of the whole body (water, in this case) - the warmer ones moved away from the source of heat to let the cooler ones collect the heat.
So, its clear that convection requires a medium (specifically, a non-solid medium). Unlike radiation, if there is no medium near the source, it cannot loose its heat simply using convection. (It can of course loose it via radiation.)
Lets comes to your heating of iron rod case.
What you said is partly correct, that convection is one of the modes of heat transfer here. But, so is radiation. Remember, that the iron rod is too hot as compared to the surrounding temperature and so it will radiate a lot of heat. In fact, the heat is so much that the rod glows bright red. (If you know a little about the EM spectrum, you would know that when the emission from a body also includes the visible spectrum, we can actually see (a part of) the emission spectrum.)
In reality, all 3 modes of heat transfer occur simultaneously.
(Even in the above beaker example, the water molecules, (along with convection) give out heat in the form of radiation as well, as they have a non-zero temperature. They also transfer heat by collisions to other water molecules, which is known as conduction. However, in that example, convection was the most dominant mode of heat transfer.)
If you wish to know the exact difference between these modes of transfer, you would perhaps need to take up intermediate-level engineering course.
No. Light (as you can see --- it's red hot! --- and infrared light which you cannot see) leaves the metal surface and reaches your skin/thermometer directly, and would do so without air.
protected by Qmechanic♦ Jan 10 '13 at 22:59
Thank you for your interest in this question. Because it has attracted low-quality answers, posting an answer now requires 10 reputation on this site.
Would you like to answer one of these unanswered questions instead?