Take the 2-minute tour ×
Physics Stack Exchange is a question and answer site for active researchers, academics and students of physics. It's 100% free, no registration required.

If I have a plot of current ($y$ axis) against 1/Resistance ($x$ axis).

The circuit it is measured from is a simply 2 resistors connected in parallel to battery, where the potential across the resistors is $1V$. One resistor remains fixed, and the second varies, the resistance plotted on the graph is only the resistance of the second resistor.

Does this mean that the gradient will be voltage, but will it be $1V$ or less, as the resistance on the graph is only one from one of the resistors?

Also what will the $y$ intercept signify? $I = V/R +c$, what does the $c$ represent?

share|improve this question
add comment

1 Answer

up vote 3 down vote accepted

Hint: Use Ohm's law $I=\frac{V}{R_p}$ and the formula $\frac{1}{R_p}=\frac{1}{R}+\frac{1}{R_0}$ for parallel resistors to derive a straight line in a $I$-$\frac{1}{R}$ diagram

$$ I~=~V \left(\frac{1}{R}+\frac{1}{R_0}\right). $$

Here $R$ and $R_0$ are the variable and the fixed resistor, respectively. To answer OP's two questions:

  1. The slope is $V=1{\rm Volt}$.

  2. The intercept of the straight line on the vertical $I$-axis is $c=\frac{V}{R_0}$. The intercept of the straight line on the horizontal $\frac{1}{R}$-axis is $\frac{-1}{R_0}$.

share|improve this answer
    
Thanks, so it will be 1 volt even though the graph does not include the resistance of the fixed resistor? Also how did you get to the y intercept? (I know using I = V/R, but why is the resistance that of the fixed resistor?) –  Jonathan. Dec 12 '11 at 7:44
add comment

Your Answer

 
discard

By posting your answer, you agree to the privacy policy and terms of service.

Not the answer you're looking for? Browse other questions tagged or ask your own question.