Take the 2-minute tour ×
Physics Stack Exchange is a question and answer site for active researchers, academics and students of physics. It's 100% free, no registration required.

Is it possible that if you have 2 ultraviolet lasers, that are invisible to the human eye, and if you aim their beams to intersect at some point, that the place of intersection will show a lower visible wavelength of light, caused by interference of the light freqency? Can any other form of heat or energy be generated at the intersection?

If so, can someone provide a link to the explanation? I am curious about this.

EDIT: I should add that the 2 lasers would have different light frequencies while they are both invisible to the human eye. So, I am wondering about interference between light freqencies.

share|improve this question
2  
interference causes change in amplitude, not change in freq.en.wikipedia.org/wiki/… notice that the intensity is only thing which is changing. –  Vineet Menon Dec 11 '11 at 4:55
1  
Interference changes the spatial distribution of intensity of the same frequency. –  Vladimir Kalitvianski Dec 11 '11 at 11:40
    
Interference only affects like-frequencies as long as your measurement is time averaged. Instantaneous measurement would show interference between frequencies. –  Colin K Dec 14 '11 at 1:34
    
If all you care about is the invisible part, and not actually ultraviolet, then en.wikipedia.org/wiki/Two-photon_excitation_microscopy is for you. –  jcohen79 Oct 9 '12 at 5:13
add comment

2 Answers 2

up vote 2 down vote accepted

What you say is not possible with interference. Interference of light does not produce new colors of light. Light would have to scatter inelastically off of some molecules to produce a down-shifted frequency (Raman scattering or some type of wave-mixing phenomena). The point is, the light should interact with matter to change its frequency.

share|improve this answer
1  
Why not? –  Peter Shor Dec 11 '11 at 5:18
1  
Heterodyning and Homodyning techniques need a mixing element. In electronics, a simple diode arrangement acts as a mixer whereas in optics, a beam-splitter cube acts as a mixer. Photons do not interact with each other. This is fundamental. You need an interaction to change the energy of a photon. (Also, interference is not observed with completely uncorrelated light). –  Antillar Maximus Dec 11 '11 at 15:17
1  
I have never heard of a glass beam-splitter which can act as a mixer. This would make nonlinear optics substantially easier if it were true. I think you are confusing the beam-splitters role (giving two beams parallel k-vectors) and the mixing process which requires a material with a nonlinear polarizability. –  user2963 Dec 11 '11 at 15:55
    
"Photons do not interact with each other." I'll caution you that this is true in classical optics, but not in a fully quantum treatment. That said, light-on-light effects are very weak for ordinary light intensities. –  dmckee Dec 11 '11 at 17:09
1  
@AntillarMaximus You don't need a direct interaction...they interact at the one-loop level. –  dmckee Dec 11 '11 at 22:52
show 5 more comments

If you use the appropriate non-linear media, and both beams have a high enough intensity (probably requiring pulsed lasers), you may be able to have a visible effect at the point inside the media where the beams intersect. Such nonlinear optics are pretty difficult to get working in practice, but not theoretically impossible.

My understanding is that pretty much all optically-pumped lasers convert (typically incoherent) high-energy (short wavelength) photons into laser light with somewhat lower-energy (longer wavelength) photons.

share|improve this answer
add comment

Your Answer

 
discard

By posting your answer, you agree to the privacy policy and terms of service.

Not the answer you're looking for? Browse other questions tagged or ask your own question.