Physics Stack Exchange is a question and answer site for active researchers, academics and students of physics. Join them; it only takes a minute:

Sign up
Here's how it works:
  1. Anybody can ask a question
  2. Anybody can answer
  3. The best answers are voted up and rise to the top

Flow-straighteners are used before flow-meters because they remove disturbances from the flow and achieve nearly-fully developped velocity profiles. But is there any other uses of flow straighteners than flow-metering ? Car companies like Mitsubishi, for instance, developped their own models of flow straighteners, what for ?

share|cite|improve this question

Jet pipe is employed in turbo-jet engine. It is situated before afterburner and after the turbine. It (among all the other functions) also acts as the flow straightener.
Wind tunnels have the flow straightener before the nozzle. It is very important for a wind tunnel to have a flow straightener, so that the test section has as less turbulence as possible.

share|cite|improve this answer

Flow straighteners are also used in experimental setups, where a uniform flow free of swirl is required. Swirl can be induced notably by a motor. This could be important in wind tunnel design, or study of liquid flows in ducts.

In order to properly remove swirl, honeycomb designs having cell lengths at least 6-8 times their diameter should be used, see reference.

The aerodynamic design of blower tunnels with wide-angle diffusers. R.D. Mehta. Progr. Aerospace Sci. 18, pp. 59-120 (1979).

share|cite|improve this answer

I don't know if this counts as a "use", but check out this fountain at the Detroit airport.

share|cite|improve this answer

Your Answer


By posting your answer, you agree to the privacy policy and terms of service.

Not the answer you're looking for? Browse other questions tagged or ask your own question.