# Understanding the Seebeck effect

Thermoelectricity is, as I understand it, the difference in voltage between the hot and cold ends of two dissimilar materials. If two materials are connected at two different junctions, the hot junction will effectively liberate electrons which will flow to the cold junction, along with the heat.

All the diagrams of this I could find showed exactly two materials, connected at both the hot and cold ends. In order to have the hot side remain hot, and the cold remain cold, while transmitting the electricity, ideally a substance is desired that conducts electricity well, but heat poorly. This is the measure of quality. A good overview paper is: New Directions for Low-Dimensional Thermoelectric Materials by Dresselhaus et al.

"ZT= S2rT/j, where S, r, T, and j are, respectively, the Seebeck coefficient, electrical conductivity, temperature, and thermal conductivity"

Maximizing efficiency of a thermocouple is, in fact, a matter of finding materials that conduct heat poorly, while conducting electricity well. In practice, that's difficult, so in constructing nanomaterials to do so, they are trying to scatter phonons while not scattering electrons.

Questions:

1. How do you make a series circuit with lots of thermocouples? Surely this must be done, yet when I draw a diagram, I can't come up with a way that doesn't look like two identical thermocouples are simply operating in opposing directions. This is answered below (and thanks), but note the answerer is incorrect about the need for thermal conductivity. Ideally, you want to insulate these things, and have as little heat as possible produce as much electricity as possible.

2. In the diagram drawn by the answer, it shows a thermopile as a zig-zag connection of two materials between hot and cold. This makes perfect sense now that I see it, but then, does material A transport electrons from hot to cold, while material B transports them from cold to hot? I thought I intuitively understood the Seebeck effect as a liberation of electrons from the hot end, effectively by "shaking them loose" but it appears one material must be doing the reverse? I'm guessing this is similar to galvanic action, where one material wants an electron to complete a valence shell, and the other wants to give one away?

3. I have now drawn a diagram showing a single thermocouple, a thermopile per the answer below, and my question, which is whether you can introduce a third material connecting the other two. I'm guessing you can, and that whatever its electropotential, since it's symmetric it should have no effect on the voltage of the thermopile other than its resistance.

-
Dov, I think it would be better if you ask these two questions separately. Edit one out of this post and then make it into a new post. You can link to this one to provide the context. – David Z Dec 2 '11 at 16:06

In order to have the hot side remain hot, and the cold remain cold, while transmitting the electricity, ideally a substance is desired that conducts electricity well, but heat poorly.

No. The two ends are assumed to be connected to heat sources or sinks that maintain a constant temperature at those nodes. Heat does flow well from one end to the other, which causes the thermoelectric effects. Hot electrons and cold electrons travel through the material at different rates, leading to a net flow of electric charge towards one end.

https://en.wikipedia.org/wiki/Seebeck_effect#Charge-carrier_diffusion

1. A series connection of thermocouples is called a "thermopile". It's connected like this:
2. Not sure what you're asking. You want to connect wires made of lithium, cobalt, and copper in parallel?
-
The question for a third metal arose from his problems to imagine a thermopile, I suppose. – Georg Dec 2 '11 at 18:45
Thanks for clearing up my misconception, the diagram of a thermocouple always shows two junctions with both materials, and putting those in series is not possible. I will modify the original question to show a diagram of what I am asking about a third material – Dov Dec 4 '11 at 11:42
This answer still implies that efficiency of a thermocouple is not based on good electrical conductivity, and poor thermal conductivity. This is simply not true, as can be seen in the paper I cited. It's true that you can maintain a constant temperature, but the point is to do so with MINIMAL ENERGY INPUT. The efficiency of current thermocouple generators is on the order of 6%, and with Zt of 4.0, it could be 30%. – Dov Dec 13 '11 at 4:54
@Dov: I don't understand. The Seebeck effect is due to hot electrons traveling more poorly through the metal than the cold electrons traveling in the opposite direction. So the important property for determining the Seebeck coefficient for a material is that the thermal conductivity be energy dependent. – endolith Dec 13 '11 at 15:26
@Dov: Wikipedia says "The efficiency with which a thermoelectric material can generate electrical power depends on several material properties, of which perhaps the most important is the [Seebeck coefficient]." "It is important to note that a material's Seebeck Coefficient is inversely related its carrier density. Therefore, insulators tend to have very high Seebeck coefficients, while metals have lower values due to their high carrier concentrations." Also: en.wikipedia.org/wiki/… – endolith Dec 13 '11 at 15:30