# Slingshot Projectile motion calculation [closed]

If I have distance the sling was dragged and the angle of the drag; then I require to calculate the projectile motion this sling shot would make.

What are the equations that would enable this calculation?

-

## closed as off-topic by Qmechanic♦Nov 25 '14 at 18:35

This question appears to be off-topic. The users who voted to close gave this specific reason:

• "Homework-like questions should ask about a specific physics concept and show some effort to work through the problem. We want our questions to be useful to the broader community, and to future users. See our meta site for more guidance on how to edit your question to make it better" – Qmechanic
If this question can be reworded to fit the rules in the help center, please edit the question.

can u elaborate "angle of the drag" and "distance the sling was dragged"?? – Vineet Menon Oct 11 '11 at 6:34
Basically from dragging I mean change in the position of the slingshot stone i.e. moving it backwards in order to give it speed and a angle for launch. – y ramesh rao Oct 11 '11 at 7:45

$$y=y_0 + x tan\theta -\frac{gx^2}{2(vcos\theta)^2}$$

assuming $y_0$ to be 0 the equation becomes,

$$y=x tan\theta -\frac{gx^2}{2(vcos\theta)^2}$$

Now, the only variable what you need are $v$ and $\theta$, among which you have $\theta$.

So, you need to convert your "distance dragged" to $v$.

Energy stored in the sling just before shooting will be $$U=kx^2$$ where $k$ is Hooke's constant and x is your "distance dragged".

so, $$K.E. = U = kx^2$$ $$\frac{1}{2} mv^2 = kx^2$$ $$v=\sqrt{\frac{2kx^2}{m}}$$

Hope this might help.

Regards,

-
so is the hookes law coefficient dependent on the type of the material we are using for creating the sling ? – y ramesh rao Oct 11 '11 at 13:58
true...it depends on so many things...one of them is the material.. – Vineet Menon Oct 11 '11 at 17:07

I had a similar school science project a long time ago. Fortunately, this project has left me notes. Let me share an interesting case where there is a closed form solution:

This is the projectile motion on a flat trajectory when the resistance of the medium(air) is proportional to the square of the velocity. The flat trajectory means that a projectile is launched at angles $\theta_0<15^{\circ}$. The derivation process is unfortunately too long. So I'll get away with just the final result, the equation of the trajectory.

Air resistance: $F=kv^2$
Initial velocity:$v_0$
Initial angle:$\theta_0$
Acceleration of gravity:$g$

The approximate equation of the trajectory of a projectile:

$$y=x\tan\theta_0-\frac{g}{(2kv_0)^2}(e^{2\mu}-2\mu-1)$$

where $\mu=\frac{kx}{\cos\theta_0}$

To compare the trajectory in air with a trajectory in a vacuum, expand $e^{2\mu}$ into Taylor series and after obvious cancellations we get:

$$y=x\tan\theta_0-\frac{g}{2}\left(\frac{x}{v_0\cos\theta_0}\right)^2-\frac{gkx}{3}\left(\frac{x}{v_0\cos\theta_0}\right)^2-...$$

Here the collection of the first two terms, independent of the drag coefficient $k$, coincides with the equation of the trajectory of the projectile in a vacuum, the third term gives the correction due to the impact of the resistance: That means, the actual trajectory is below the parabola.

-