# calculating ballast needed to offset wobble of a 1g unbalanced centerfuge spinning at 20000G's

So this seemed pretty straight forward at first, but then I wasnt too sure about gravity forces...

So.

• centerfuge
• 2 samples
• 1 sample is 1gram heavier than the other
• centerfuge at top speed is exerting 20000 gravitys of force on the samples

What kind of weight / ballast is needed to keep the centerfuge from wobbling off the table?

Id imagine this is a linear equation ... So if i could get the equation that would be TOPS!

Ballast should be placed on 4 corners on the outside of the sample

-
At what radius and angle relative to the samples will the ballast be placed? –  Alan Rominger Aug 23 '11 at 21:32
description updated –  delinquentme Aug 23 '11 at 21:38
Are you saying that it's like a hexagonal arrangement with the 2 samples opposite each other and the balancing weights in the other positions? In that case I would place a calculated weight in the 2 locations closest to the lighter sample. Is this correct? –  Alan Rominger Aug 23 '11 at 21:43
@Zass no im only looking at 2 samples .. each opposing each other. –  delinquentme Aug 23 '11 at 22:04
@delinquentme Then I have no idea what the 4 corners specification means. In order to solve this problem people need to have the geometry clear. If you can put something right next to the lighter sample, then you would place the difference in masses between the light and heavy sample. I'm pretty sure you're looking for $a=v^2/r$ type of math for this, but the force balancing depends on the geometry witch seems to be either trivial or unclear. –  Alan Rominger Aug 23 '11 at 22:25