Physics Stack Exchange is a question and answer site for active researchers, academics and students of physics. Join them; it only takes a minute:

Sign up
Here's how it works:
  1. Anybody can ask a question
  2. Anybody can answer
  3. The best answers are voted up and rise to the top

Watching a documentary, I heard Michio Kaku telling that when he was young, he built a home-made particle accelerator. What I would like to know is if I, myself can do so? And how?

share|cite|improve this question
Whether you can do so is a question that only you can answer, and you can answer it by trying to build one. A web search for "homemade cyclotron" yields many interesting articles, videos and sites. Whether those techniques are within your level of skill and budget, how should we know? – Eric Lippert Jul 8 '14 at 16:09
In the general sense all you need is a source of particles and an accelerating field. Both exist in a fluorescent tube or a CRT. With a Van der Graaff generator you can make quite high voltages - 10's of kV - with which to accelerate electrons / make "lightning". But even a BB gun is a "particle" accelerator. You might have to be more specific. – Floris Jul 8 '14 at 19:25
up vote 9 down vote accepted

It is not so hard, but it won't be able to generate enough high energetic particles.

The best example for a particle accelerator is a CRT (cathode ray tube), which you can find in every CRT monitor or TV. It can generate around $40\rm\,keV$ electrons. (LHC generates $3.5\rm\,TeV$ protons, thus it is around a hundred million times stronger).

Only a particle accelerator isn't enough, if you want to make experiments with it, you need some analytic/measurements devices also. In the current accelerators, they are nearly so complex and costly as the main accelerating device.

There is also a device capable to be built in home, it is the Farnsworth fusor:

enter image description here

Maybe it is not a particle accelerator in the classical sense, it creates enough strong field to be able to fuse deuterons (although it is doing this with terrible efficiency, around $10^{-8}$). You can see a Farnsworth fusor scematic below:

enter image description here

There is a whole community of home fusors which can be found here.

share|cite|improve this answer

Well, there are a lot of different types of particle accelerators.

Besides the already suggested cathode ray tube, another rather small accelerator would be a cyclotron. The first one was built by Lawrence and Livingston, "a device about 4.5 inches in diameter used a potential of 1,800 volts to accelerate hydrogen ions up to energies of 80,000 electron volts." I guess it would be possible to get a high voltage power source and hydrogen, but really building a working device would probably take a long time.

share|cite|improve this answer
And how can i ionize hydrogen atoms? – George Smyridis Jul 8 '14 at 12:27
The ionization energy of nuclear hydrogen is 13,6eV, which corresponds to electromagnetic radiation of 91nm wavelength (extreme UV). So you could use a "light" source emitting a wavelength smaller than 91nm and just direct it at the hydrogen. Another way would be to heat it up. However, there might be easier solutions, e.g. by applying an electric field, but i'm not sure about this. Interesting question, though. – Timitry Jul 8 '14 at 15:15
Another idea: Maybe you could use a thin stripper foil (usually made from carbon) and direct your gas with some pressure through it. This is how negative ions are converted into positive ones in e.g. a Tandem Van de Graaff accelerator. However, i don't know if it will work with "slow" particles from a gas bottle. – Timitry Jul 9 '14 at 7:57

Particle accelerator that can fit on a tabletop opens new chapter for science research
June 20, 2013 - sourced by University of Texas at Austin

The laser plasma accelerator has accelerated about half a billion electrons to 2 gigaelectronvolts over a distance of about 1 inch. It's a downsizing of a factor of approximately 10,000, and marks a major milestone in the advance toward the day when multi-gigaelectronvolt laser plasma accelerators are standard equipment in research laboratories around the world.

share|cite|improve this answer
And this is related to a hobbyist's home project how? – dmckee Mar 9 '15 at 4:15
We have now millions of transistors in the same space occupied by the first transistor. Having money there are petawatt commercial lasers for sale. – Helder Velez Mar 9 '15 at 4:51
;) a Slingshot was my first homemade particle accelerator, pocket sized (a lot of electrons/protons/ neutrons not too much accelerated). – Helder Velez Mar 9 '15 at 5:02

protected by Qmechanic May 4 '15 at 0:25

Thank you for your interest in this question. Because it has attracted low-quality or spam answers that had to be removed, posting an answer now requires 10 reputation on this site (the association bonus does not count).

Would you like to answer one of these unanswered questions instead?

Not the answer you're looking for? Browse other questions tagged or ask your own question.