Physics Stack Exchange is a question and answer site for active researchers, academics and students of physics. Join them; it only takes a minute:

Sign up
Here's how it works:
  1. Anybody can ask a question
  2. Anybody can answer
  3. The best answers are voted up and rise to the top

I understand how telescope, microscope and glasses work.
But how do contact lenses work?

share|cite|improve this question
up vote 3 down vote accepted

Your question is really "how does the human eye work?", since the contact lens is designed to adjust the optics of the human biological lens.

lens in the human eye

This image from the wikipedia article on the anatomical lens shows how the lens focuses incoming light from the left onto the retina (right).

For people who are nearsighted or farsighted, the light coming into the eye does not end up in focus. See this picture for the case of nearsightedness:


You should imagine the contact lens being placed over the cornea (left surface) and causing the rays to adjust so that the image ends up in focus.

share|cite|improve this answer
I think he really meant 'how do contact lenses work'. As far as I know, the same way that spectacles work. – Robert Smith Nov 18 '10 at 5:18
Well, this is just the way I like to think about it. :) – j.c. Nov 18 '10 at 5:21

The thing that confused me at first about contact lenses was that they didn't look like "normal" lenses, in which each side of them curved in the opposite direction to each other.

As I understand them, contact lenses are Meniscus lenses - wherein the sides are curved in the same direction as each other, but more curved on one of the sides. You can see some examples here.

share|cite|improve this answer
The inner surface of a contact lens doesn't do very much. Since the refractive index of the glass/plastic of the lens and the (mostly) water of the cornea is similar it has very little power - and it's constrianed to be that shape to fit comfortably – Martin Beckett Jun 11 '12 at 16:19

Contact lenses work in the same way as glasses, by adding or subtracting wavefront curvature. This basically adjusts where the focal point of light entering the eye is, glasses and contact lenses are designed to adjust it so that the focal point of the light lies on the retina.

The main differences I can see between glasses and contact lenses, is that the contact lens faces are both curving outwards like this (( rather than this () or this )( like traditional glasses. This is so that the lens can rest comfortably on the outside of the eye.

If we remember the laws of optics, we remember that the light is only affected by the changes in refractive indices, in the boundaries between air and glass for example. In normal glasses the two surfaces are air to glass and glass to air.

In contact lenses we have again two surfaces, but it's air to contact lens then contact lens to eye. Note I say contact lens not glass as contact lenses are made from a variety of materials. The focal point adjustment in a contact lens happens mostly at the outer boundary - the one between air and the contact lens.

The fact that the other surface is curved the 'wrong' way (for some types of lens requirements) means that it's effect must be calculated and compensated for by the outer surface.

share|cite|improve this answer

Your Answer


By posting your answer, you agree to the privacy policy and terms of service.

Not the answer you're looking for? Browse other questions tagged or ask your own question.